Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Yaesu FT767GX bits required ?
Hello all.
I have just taken receipt of a Yaesu FT-767GX and there are a few bits I need for it and wondered if anyone can help me with these: One of the rubber grip covers on the small rotary knobs is missing ? The rubber grip band around the main rotary channel selector is snapped ? The 4x rubber feet on the base of the unit are missing ? The 4x rubber feet (??) on the left hand side of the unit are missing ? The 3x flaps that cover the holes, where the additional band units fit, are missing ? Any information at all will be greatly received -- Jim Burrill (Smogthemog) M1BMW Kiteaholic www.jbphonetech.info --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.688 / Virus Database: 449 - Release Date: 18/05/2004 |
#2
|
|||
|
|||
Watch the classifieds, maybe you can get a parts radio. The FT736R has the same
knobs. jw K9RZZ |
#3
|
|||
|
|||
"Smog" wrote in message
... Hello all. I have just taken receipt of a Yaesu FT-767GX and there are a few bits I need for it and wondered if anyone can help me with these: One of the rubber grip covers on the small rotary knobs is missing ? The rubber grip band around the main rotary channel selector is snapped ? The 4x rubber feet on the base of the unit are missing ? The 4x rubber feet (??) on the left hand side of the unit are missing ? The 3x flaps that cover the holes, where the additional band units fit, are missing ? Any information at all will be greatly received -- Check the Yaesu parts distributor/source (for current models) in the UK. MANY of the identical parts you mentioned (e.g. bumpers, rubber feet) are used on other current production Yaesu radios .. and sometimes appear on Kenwood models with a bit of styling difference. w9gb |
#4
|
|||
|
|||
Watch the classifieds, maybe you can get a parts radio. The FT736R has the same
knobs. jw K9RZZ |
#5
|
|||
|
|||
"Smog" wrote in message
... Hello all. I have just taken receipt of a Yaesu FT-767GX and there are a few bits I need for it and wondered if anyone can help me with these: One of the rubber grip covers on the small rotary knobs is missing ? The rubber grip band around the main rotary channel selector is snapped ? The 4x rubber feet on the base of the unit are missing ? The 4x rubber feet (??) on the left hand side of the unit are missing ? The 3x flaps that cover the holes, where the additional band units fit, are missing ? Any information at all will be greatly received -- Check the Yaesu parts distributor/source (for current models) in the UK. MANY of the identical parts you mentioned (e.g. bumpers, rubber feet) are used on other current production Yaesu radios .. and sometimes appear on Kenwood models with a bit of styling difference. w9gb |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTD: Yaesu FT767GX PSU board wanted | Antenna | |||
WTD: Yaesu FT767GX PSU board wanted | Equipment | |||
WTD: Yaesu FT767GX PSU board wanted | Equipment | |||
Yaesu FT767GX bits required ? | Equipment | |||
Yaesu FT767GX bits required ? | Equipment |