|
This comment reminded me of a High Current Horror Story related to me by
an older friend. In his youth he repaired radios, hi-fi systems, and the like. One well-heeled customer had large, expensive speakers at the room corners, with the hi-fi in the middle. He'd put the speaker wiring in the walls. For connectors, he'd used ordinary mains AC power receptacles, with matching cord and plug on each speaker. When the repair was finished, my friend plugged the speaker back into the outlet. He knew exactly what had happened the moment he plugged it in when he heard a monstrous, deafening hum -- but even then it was too late, the speaker was cooked. Let's see, 120^2 / 8(*) = . . . now, that's LOUD! Roy Lewallen, W7EL (*) and I suspect that the speaker impedance was somewhat lower yet at 60 Hz. Rex wrote: On 30 Aug 2004 07:38:34 -0700, (Mike Monett) wrote: High Voltage Sparks and Arcs - cursor down to "Crane Tangles with a 46 kV Feeder..." http://205.243.100.155/frames/longarc.htm Wow. Spectacular videos. I cranked up the sound for maximum effect on the 500KV one, and after several plays, one of my destop speakers walked off the desk and fell on the floor. |
And you reminded me of something too. Not really a problem, but could
have been. When I was working on mainframe computers in the 70's we installed a new machine in Europe. The power for the computer was supplied by a big motor generator with an output of 3-phase 208 V 400 Hz (or was it CPS back then?) power to the computer. I learned from the customer that they discovered that a wiring error had routed the motor generator power to the wall sockets in the computer room. I told the customer that it was very good they had found this problem before people used the sockets. If the cleaning lady had come in and plugged a vacuum cleaner into the 400 Hz power, it would have probably sucked all the air out of the room. :-) -Rex, KK6MK On Mon, 30 Aug 2004 23:42:03 -0700, Roy Lewallen wrote: This comment reminded me of a High Current Horror Story related to me by an older friend. In his youth he repaired radios, hi-fi systems, and the like. One well-heeled customer had large, expensive speakers at the room corners, with the hi-fi in the middle. He'd put the speaker wiring in the walls. For connectors, he'd used ordinary mains AC power receptacles, with matching cord and plug on each speaker. When the repair was finished, my friend plugged the speaker back into the outlet. He knew exactly what had happened the moment he plugged it in when he heard a monstrous, deafening hum -- but even then it was too late, the speaker was cooked. Let's see, 120^2 / 8(*) = . . . now, that's LOUD! Roy Lewallen, W7EL (*) and I suspect that the speaker impedance was somewhat lower yet at 60 Hz. Rex wrote: On 30 Aug 2004 07:38:34 -0700, (Mike Monett) wrote: High Voltage Sparks and Arcs - cursor down to "Crane Tangles with a 46 kV Feeder..." http://205.243.100.155/frames/longarc.htm Wow. Spectacular videos. I cranked up the sound for maximum effect on the 500KV one, and after several plays, one of my destop speakers walked off the desk and fell on the floor. |
Our newer systems back in 1985 used dual MG setup 400 Hz and 50-60 VAC
anyway, one of the tape drive units had failed, IBM arrived and was checking power connections in the power supply (they call it a power tub). Other IBM guy (new young pup) kept leaning on the control unit while the old timer IBM guy was trying to probe the voltages at the breakers. Almost gave him a large shock before we told him to get off our control unit. Same young pup wants to get under the floor to unplug the large power connector russelstoll 30 amp 3 phase, old timer grabs him by his belt from behind, and saved his life ! IBM guy takes the rubber cord and then gently glances the RS connector to the floor supports (all metal and gounnded with copper cables) large sparks when he did this ! Young ibm pup almost pee in his pants. Turns out somebody on work crew did not wire the ground cables properly so the floor was HOT HOT HOT ! Good thing it was carpeted flooring in the computer center. allen Rex wrote: And you reminded me of something too. Not really a problem, but could have been. When I was working on mainframe computers in the 70's we installed a new machine in Europe. The power for the computer was supplied by a big motor generator with an output of 3-phase 208 V 400 Hz (or was it CPS back then?) power to the computer. I learned from the customer that they discovered that a wiring error had routed the motor generator power to the wall sockets in the computer room. I told the customer that it was very good they had found this problem before people used the sockets. If the cleaning lady had come in and plugged a vacuum cleaner into the 400 Hz power, it would have probably sucked all the air out of the room. :-) -Rex, KK6MK |
| All times are GMT +1. The time now is 08:48 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com