Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #51   Report Post  
Old August 23rd 04, 06:45 PM
Gregg
 
Posts: n/a
Default

AIEEEEE! :-o

--
Gregg t3h g33k
"Ratings are for transistors....tubes have guidelines"
http://geek.scorpiorising.ca
  #52   Report Post  
Old August 23rd 04, 09:47 PM
Martin Potter
 
Posts: n/a
Default


Mark Harriss ) writes:
It seems the techs had wired it in without
relays to isolate the line input cables and were
trying to power an entire city block: no wonder it
was stalling. They were lucky they didn't fry a
linesman too.



There is a lot to be said for nipping in to a pub occasionally. Maybe one
could find a lot of safe linemen there.

.... Martin



  #53   Report Post  
Old August 24th 04, 10:44 PM
James Horn
 
Posts: n/a
Default

While not low voltage, I remember reading in the '60s in Scientific
American an article which mentioned how many milliamps of current was
enough to be felt / dangerous / deadly, etc. It mentioned that
substantially larger currents could sometimes even be safer as they could
cause involuntary muscle contractions which would interrupt the current
flow.

The example given was of a worker at a high-rise construction site in New
York who was changing out of his work clothes at the end of his shift in a
temporary shack that also housed the site electrical power connections.
While doffing his trousers he accidentally backed into a high voltage
panel. An estimated 60 amperes passed from one buttock to the other
through muscles that immediately straightened, propelling him through the
shack and its door and into two lanes of road traffic which immediately
stopped.

Because the current didn't pass through any vital organs, he only
sustained surface burns and various bruises and scrapes though the
electrical panel manufacturer's logo is now mirror-image tattooed to his
behind.

I've *gotta* find the source of all this...

Jim Horn, WB9SYN/6

  #54   Report Post  
Old August 24th 04, 11:41 PM
Roger Gt
 
Posts: n/a
Default


"James Horn" wrote in message
...
: While not low voltage, I remember reading in the '60s in
Scientific
: American an article which mentioned how many milliamps of
current was
: enough to be felt / dangerous / deadly, etc. It mentioned that
: substantially larger currents could sometimes even be safer as
they could
: cause involuntary muscle contractions which would interrupt the
current
: flow.
:
: The example given was of a worker at a high-rise construction
site in New
: York who was changing out of his work clothes at the end of his
shift in a
: temporary shack that also housed the site electrical power
connections.
: While doffing his trousers he accidentally backed into a high
voltage
: panel. An estimated 60 amperes passed from one buttock to the
other
: through muscles that immediately straightened, propelling him
through the
: shack and its door and into two lanes of road traffic which
immediately
: stopped.
:
: Because the current didn't pass through any vital organs, he
only
: sustained surface burns and various bruises and scrapes though
the
: electrical panel manufacturer's logo is now mirror-image
tattooed to his
: behind.
:
: I've *gotta* find the source of all this...
: Jim Horn, WB9SYN/6


60 amps though "Human flesh" will cook it well done! 15mA through
the vital organs will kill! As little as 30 microamps will cause
a severe muscle reaction and not even the sturdiest will be able
to resist movement if the current reaches 2 mA.




  #55   Report Post  
Old August 25th 04, 10:17 PM
James Horn
 
Posts: n/a
Default

Roger Gt wrote:

60 amps though "Human flesh" will cook it well done! 15mA through
the vital organs will kill! As little as 30 microamps will cause
a severe muscle reaction and not even the sturdiest will be able
to resist movement if the current reaches 2 mA.



Generally true, Roger, but *time* is as important a variable as well. To
cook anything well done takes substantial energy and that's a function of
current, voltage and time. The point of the story was that the effect was
immediate, the current flow brief, and the surface was still burned.

I don't volunteer to try recreating the experiment though!

Jim Horn, WB9SYN/6



  #56   Report Post  
Old August 26th 04, 02:21 AM
Roger Gt
 
Posts: n/a
Default


"James Horn" wrote in message
...
: Roger Gt wrote:
:
: 60 amps though "Human flesh" will cook it well done! 15mA
through
: the vital organs will kill! As little as 30 microamps will
cause
: a severe muscle reaction and not even the sturdiest will be
able
: to resist movement if the current reaches 2 mA.
:
:
: Generally true, Roger, but *time* is as important a variable as
well. To
: cook anything well done takes substantial energy and that's a
function of
: current, voltage and time. The point of the story was that the
effect was
: immediate, the current flow brief, and the surface was still
burned.
:
: I don't volunteer to try recreating the experiment though!
:
: Jim Horn, WB9SYN/6
:


I wasn't trying to paint a picture, that was the story tellers
job, I only volunteered a little information. However, I do
doubt that he got 60 amperes through his buttocks! The current
would have caused the required impulse to part with the voltage
rather early on. (:)

I actually worked in a place where they were testing nerve
stimulus devices which allowed for diagnosing whether there was
damage in some particular part of the body. As a final test they
had the technicians put needles into their arms to take a sample
reading. I passed on that one. Those poor guys ever got stopped
by the police they would have a hard time explaining the tracks.



  #57   Report Post  
Old August 28th 04, 05:23 PM
Ken Scharf
 
Posts: n/a
Default

OK, some more stupid tricks.
In Jr. High school science fair some kid
brought in a one tube radio, powered by
a 1.5v A battery and a 90 volt B battery.
Radio wasn't working so some brainiac
said 'test the batteries'. How do you test
them? Kid said he tested transistor radio
batteries by touching them to his tounge,
to taste the sour a good battery caused!!!

Well he tried that with the B battery!

PS...It was VERY GOOD!!!!!

(just how far did he threw that battery
across the room, I forgot!)
  #58   Report Post  
Old August 28th 04, 05:24 PM
Ken Scharf
 
Posts: n/a
Default

Gary S. wrote:
I seem to recall that one of the early founders of amateur radio in
the US died from a similar accident.

Details escape me, although I recall reading about it sometime last
year.

Happy trails,
Gary (net.yogi.bear)
------------------------------------------------
at the 51st percentile of ursine intelligence

Gary D. Schwartz, Needham, MA, USA
Please reply to: garyDOTschwartzATpoboxDOTcom

Russ Hall was eletrocuted by a CRT power supply
in the 30's while building an early TV receiver.
  #59   Report Post  
Old August 30th 04, 03:38 PM
Mike Monett
 
Posts: n/a
Default

Paul Burridge wrote in message . ..
Hi all,

Anyone got any high-current/low-voltage horror stories they'd care to
share? You know; where your messin' about with a car battery or
something like that and forget to take your watch off or whatever.

p.


Hi Paul,

Here's some to remember next time you are raising an antenna near power lines:

Guy on PCP grabs 16,000 volts and lives:

http://members.tripod.com/~StormTrooper_2/index2.htm

High Voltage Sparks and Arcs - cursor down to "Crane Tangles with a 46 kV Feeder..."

http://205.243.100.155/frames/longarc.htm

Best

Mike
  #60   Report Post  
Old August 30th 04, 06:36 PM
Roger Gt
 
Posts: n/a
Default


: Paul Burridge wrote in message
. ..
: Hi all,
:
: Anyone got any high-current/low-voltage horror stories they'd
care to
: share? You know; where your messin' about with a car battery
or
: something like that and forget to take your watch off or
whatever.

Yes.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: sma-to-bnc custom fit rubber covered antenna adapter Stephen G. Gulyas Antenna 20 December 8th 04 05:35 AM
Lumped Load Models v. Distributed Coils Wes Stewart Antenna 480 February 22nd 04 02:12 AM
Current in antenna loading coils controversy (*sigh*) Roy Lewallen Antenna 25 January 15th 04 09:11 PM
Smith Chart Quiz Radio913 Antenna 315 October 21st 03 05:31 AM


All times are GMT +1. The time now is 09:04 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017