In article ,
John Woodgate wrote:
[...]
But with a **tuned load**, 'linearity' can be achieved even with Class C
biasing. This is why linearity in this case is defined as output power
being proportional to input power.

I think this is right:

If this isn't the slow modulation case, for a single device RF output
stage to work as a linear you need to bias it to about the point where gm
is 1/2 the "mid current" gm. This makes the stage class AB.

If you want to go towards class B or C there are things you can do in the
slow modulation case. Basically as the RF input increases, you move into
class C and as it decreases you move back towards AB. Moving to class C
lowers the output power for large signals a bit so the AB class's standing
current can be reduced by some amount.


--
--
forging knowledge