Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Uncle Peter wrote:
I always wondered why Motorola (of all peopled) used PNP RF transistors in the final and two driver stages in their Micor base station and mobile radios. Were those perhaps germanium transistors? The first Ge transistors were PNP, and the first (Ge) audio power transistors I recall seeing in wide use, in auto radios, were PNP. I'm not sure why PNP was favored in the early days, whether due to some basic physics reason or some more practical processing or production considerations. Roy Lewallen, W7EL |
#2
![]() |
|||
|
|||
![]()
Roy Lewallen wrote:
I'm not sure why PNP was favored in the early days, whether due to some basic physics reason or some more practical processing or production considerations. I always had the distinct impression it was processing/production considerations. -- Frank Abagnale on "Rathergate" (the CBS forgery scandal): "If my forgeries looked as bad as the CBS documents, [the movie "Catch Me If You Can"] would have been 'Catch Me In Two Days'." |
#3
![]() |
|||
|
|||
![]() "Roy Lewallen" wrote in message ... Uncle Peter wrote: I always wondered why Motorola (of all peopled) used PNP RF transistors in the final and two driver stages in their Micor base station and mobile radios. Were those perhaps germanium transistors? The first Ge transistors were PNP, and the first (Ge) audio power transistors I recall seeing in wide use, in auto radios, were PNP. I'm not sure why PNP was favored in the early days, whether due to some basic physics reason or some more practical processing or production considerations. Roy Lewallen, W7EL Hello Roy These fairly modern devices, with 211-xx style flange mounts. Although they were marked with Motorola Communications inhouse numbers, they appear to have been part of the general Motorola RF transistor family, with complimentary NPN equivalents. pete |
#4
![]() |
|||
|
|||
![]()
Hm, y'got me, then.
Maybe they had a big stock of them left over from a canceled project, so decreed that the engineer had to design them in so they'd get used up. That sort of thing does happen. . . Roy Lewallen, W7EL Uncle Peter wrote: Hello Roy These fairly modern devices, with 211-xx style flange mounts. Although they were marked with Motorola Communications inhouse numbers, they appear to have been part of the general Motorola RF transistor family, with complimentary NPN equivalents. pete |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: RF Concepts 2 meter all-mode amplifier RFC 2-417 | Equipment | |||
2m Amplifier Designs | Homebrew | |||
How Clean is a Palomar 300A? | Equipment | |||
FS: RF Concepts 2 meter all-mode amplifier RFC 2-417 | Equipment |