RadioBanter - cw adapter htx-10

RadioBanter (https://www.radiobanter.com/)

- Homebrew (https://www.radiobanter.com/homebrew/)

- - cw adapter htx-10 (https://www.radiobanter.com/homebrew/23601-cw-adapter-htx-10-a.html)

cw adapter htx-10

Hello all,

I have the schematic for this altoids project but there is no parts list
that I can find. I can build them but getting parts is different. My last
project was a rockmite 20. I was successful but this project is only by
schematic. If anyone knows anything about this thing, can you help me out.
I have a feeling once I get started, I may have quite a few questions. Is a
relay a relay a relay? K1 is a relay but does it have to be what he
suggests? I will probably get that relay but I am trying to learn as well.
Thanks so much.

--
73
G. Doughty
ki4bbl AT cox DOT net

Also,
I am looking now at digi-key.com and am wondering, how many watt resistors I
will need. Wow, a lot to learn.

Thanks

"G. Doughty" wrote in message
news:TwD5d.383$TY2.2@lakeread04...
Hello all,

I have the schematic for this altoids project but there is no parts list
that I can find. I can build them but getting parts is different. My
last
project was a rockmite 20. I was successful but this project is only by
schematic. If anyone knows anything about this thing, can you help me
out.
I have a feeling once I get started, I may have quite a few questions. Is
a
relay a relay a relay? K1 is a relay but does it have to be what he
suggests? I will probably get that relay but I am trying to learn as
well.
Thanks so much.

--
73
G. Doughty
ki4bbl AT cox DOT net

G. Doughty wrote:

Hello all,

I have the schematic for this altoids project but there is no parts list
that I can find. I can build them but getting parts is different. My last
project was a rockmite 20. I was successful but this project is only by
schematic. If anyone knows anything about this thing, can you help me out.
I have a feeling once I get started, I may have quite a few questions. Is a
relay a relay a relay? K1 is a relay but does it have to be what he
suggests? I will probably get that relay but I am trying to learn as well.
Thanks so much.

--
73
G. Doughty
ki4bbl AT cox DOT net

All relays are not the same. If the adapter is the one shown at
http://www.qsl.net/n5ib/page2.html
then it is a 2 pole 12 volt relay. You should use the one he
used, until you are comfortable that you know enough to
figure out a different one. A different relay is a good idea,
as the circuit uses power from the htx 10 and the relay
consumes most of it. A different relay that uses less power
would be a better choice. The one on the web site uses
..72 watts.

But, since you did not post a reference to the schematic,
we can only guess that it is the one at the site mentioned
above. Next time, post a url where we can see the schematic
you are using.

On your question about resistors - 1/4 watt will be fine.

Use K1 as specified, and order 1/4w resistors.

K1 is Digikey Part 255-1002-ND - Mouser may have them for less $$ (Aromat
TQ2E-12V)

For NPN's use 2N2222A or equiv. (TP2222, PN2222A, etc)

For PNP I'd use 2N2907's as they are a little more sturdy than the 2N3906

There is no side tone generated with this mod.

73 de KB9BVN

Let us know how it turns out! Have fun!

"G. Doughty" wrote in message
news:TwD5d.383$TY2.2@lakeread04...
Hello all,

I have the schematic for this altoids project but there is no parts list
that I can find. I can build them but getting parts is different. My
last
project was a rockmite 20. I was successful but this project is only by
schematic. If anyone knows anything about this thing, can you help me
out.
I have a feeling once I get started, I may have quite a few questions. Is
a
relay a relay a relay? K1 is a relay but does it have to be what he
suggests? I will probably get that relay but I am trying to learn as
well.
Thanks so much.

--
73
G. Doughty
ki4bbl AT cox DOT net