Home |
Search |
Today's Posts |
#2
|
|||
|
|||
"beerbarrel" wrote in message ... Anyone have a source for a schematic for a 12v around 20 to 30 amp power supply that makes use of a full wave rectifier? I've found quite a few for a bridge rectifier but I'm not really sure how to mod them to use a full wave rectifier. I have a nice 32v 30 amp center tapped at 16v transformer that I would like to make use of. Are you mixing things together here? There are full wave bridges that use a ct transformer and half wave bridges that use non-ct transformers. I know of no distiction between bridge rectifiers and full wave rectifiers other than there can be full wave or half wave rectifiers and there is usually a disctinction between encapsulated rectifier bridges and ones built of discrete diodes and resisters. After running a 32v ct transformer thru a full wave bridge you are going to have way too much voltage for regulating down to 12v unless you enjoy the extra heat. Sounds like you intend to make a linear power supply, what sort of regulator and pass transitors do you have in mind? thanks, John. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wanted: Power Supply for TR-4C | Boatanchors | |||
Wanted: Power Supply for TR-4C | Homebrew | |||
Wanted: Power Supply for TR-4C | Boatanchors | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment |