Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 11th 05, 01:10 PM
Dominic G7NPW
 
Posts: n/a
Default


"Airy R.Bean" wrote in message
...
Picking up a project that has been put down for 6 months - has
anybody got experience of manufacturing their own ATU
switches out of brass, either as knife switches or else as
ginormous banana plugs which then engage axially with
a sliding action?

I have conceived of a design for an experimental ATU that
allows changes of configuration (including the safety earthing
when not in use) using only 8 single-pole single throw switches,
into the most common configurations.

(I may have mentioned this before in this NG, sorry if so and
thus inducing ennui in my loyal-but-paranoid fan-club of CB types
who seem to hang on my every word)


I cant believe the amount of **** you come out with!


  #2   Report Post  
Old January 11th 05, 01:15 PM
Spike
 
Posts: n/a
Default

On Tue, 11 Jan 2005 13:10:39 -0000, "Dominic G7NPW"
wrote:

I cant believe the amount of **** you come out with!


You might not like what Bean posts, and few would disagree with you,
but PLEASE DONT REPOST IT ALL JUST TO ADD A ONE-LINER.
--
from
Aero Spike
  #3   Report Post  
Old January 11th 05, 01:46 PM
Dominic G7NPW
 
Posts: n/a
Default


"Spike" wrote in message
...

SNIP

You might not like what Bean posts, and few would disagree with you,
but PLEASE DONT REPOST IT ALL JUST TO ADD A ONE-LINER.


Advice Taken, Thanks for pointing this out to me.

73 Dominic


  #4   Report Post  
Old January 11th 05, 01:50 PM
Spike
 
Posts: n/a
Default

On Tue, 11 Jan 2005 13:46:05 -0000, "Dominic G7NPW"
wrote:


"Spike" wrote in message
.. .

SNIP

You might not like what Bean posts, and few would disagree with you,
but PLEASE DONT REPOST IT ALL JUST TO ADD A ONE-LINER.


Advice Taken, Thanks for pointing this out to me.


You're welcome.

It's just that those who have killfiled Bean because they don't want
to see his posts may well killfile you for that same reason, shoud you
continue to repost the whole of his postings. Usually it's only
necessary to quote a word or two from him in your reply, as he hasn't
said anything new seemingly for ages......
--
from
Aero Spike
  #5   Report Post  
Old January 11th 05, 01:48 PM
Dominic G7NPW
 
Posts: n/a
Default


"Spike" wrote in message
...

SNIP

You might not like what Bean posts, and few would disagree with you,
but PLEASE DONT REPOST IT ALL JUST TO ADD A ONE-LINER.


Oh and there was no need to shout at me I can hear you fine.

73 Dominic




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTD: SQUARE-D LIMIT SWITCHES dt Equipment 0 October 8th 04 04:42 PM
WTD: SQUARE-D LIMIT SWITCHES dt Equipment 0 October 8th 04 04:42 PM
WTD: SQUARE-D LIMIT SWITCHES dt Equipment 0 October 8th 04 04:42 PM
pin diode attenuators and switches Active8 Homebrew 8 July 13th 03 08:49 PM
pin diode attenuators and switches Active8 Homebrew 0 July 13th 03 11:27 AM


All times are GMT +1. The time now is 03:35 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017