On Sun, 20 Feb 2005 20:49:50 -0800, Sparky wrote:
The transmitter alignment instructions for my Icom 751A tranceiver
calls for a 2 tone input during the alignment process....

"Insert 2 audio signals into the MIC Connector
1.9kHz at 3mV
1.3kHz at 3mV

Are there AF generators out ther that will generate more than one
tone? The units I am seeing seem to generate just one tone (or at
least the used stuff out ther that I could afford)

Yep. To add to the other reponses, there are two-tone audio
generators used for two-tone control testing of commercial gear.
I've got one from my dad's estate that does two-tone-sequential
with adjustable duration for each tone, and two-tone-combined, and
single-tone. Thumbwheel freq(s) select from 100 cps to 9.999 kcs.
Pot adjustable tone durations (and delays), and levels.
It's probably 15-20 years old: Automated Industrial Electroncis
Corp., Model 2TSG-1.

They must show up on eBay from time-to-time. Google claims several
'hits' there -- but a search on eBay at this time shows none.

73
Jonesy
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK