RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Homebrew (https://www.radiobanter.com/homebrew/)
-   -   Battery charger cable for Yaesu VX-2 (https://www.radiobanter.com/homebrew/66991-battery-charger-cable-yaesu-vx-2-a.html)

Phil March 17th 05 03:27 PM

Battery charger cable for Yaesu VX-2
 
I have tried to find out if the optional 12 volt mobile charger
cable for the VX-2 contains circuitry or if it just supplies
voltage to charging circuitry in the radio. Does anyone know
or have a schematic?

While we're at it, howa bout the included 110 vac charger?

I would like to take it apart, but haven't the heart (yet...)

Thanks for any info,

phil

Ken Bessler March 17th 05 03:36 PM

"Phil" wrote in message
7.142...
I have tried to find out if the optional 12 volt mobile charger
cable for the VX-2 contains circuitry or if it just supplies
voltage to charging circuitry in the radio. Does anyone know
or have a schematic?

While we're at it, howa bout the included 110 vac charger?

I would like to take it apart, but haven't the heart (yet...)

Thanks for any info,

phil


Phil - I'm only about 98% sure but I think all the charging
circuits are in the radio and battery. I converted my VX-2R's
power cable by installing RCA connectors half way between
the wall wart and plug. I then bought a 4xAA dry cell case
and put an RCA connector on it. Now I can run 3w and
recharge the Li-Ion pack, all from a set of energizers.

BTW you might want to join our group - almost 1,200 users
all with VX-2's....

http://groups.yahoo.com/group/VX-2R

--
73's es gd dx de Ken KGØWX
Grid EM17ip, Flying Pigs #1055,
List Owner, Yahoo! E-groups:
VX-2R & FT-857



Phil March 17th 05 04:26 PM

Ken,

Thanks for some very good info. I was hoping that was the case.
This opens up the possiblity of making a 12 volt mobile charger
and using the solar panel for free re-charges too.

I'll pass on the Yahoo groups. Newsgroups are wide open and
full of great folks like yourself with lots of good info.

73,

phil


"Ken Bessler" wrote in news:

Phil - I'm only about 98% sure but I think all the charging
circuits are in the radio and battery. I converted my VX-2R's
power cable by installing RCA connectors half way between
the wall wart and plug. I then bought a 4xAA dry cell case
and put an RCA connector on it. Now I can run 3w and
recharge the Li-Ion pack, all from a set of energizers.

BTW you might want to join our group - almost 1,200 users
all with VX-2's....

http://groups.yahoo.com/group/VX-2R



All times are GMT +1. The time now is 12:36 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com