Thanks for the suggestions.
The "small pattern" helped, but have to question the "readily available"
part.
I called all the main hardwares in my area and no luck.
Did find in McMaster, but steel not brass. Guess they will have to do, and
match the plated solder lugs anyway.
Thanks again.
Kaz

"Kaz" wrote in message
...
I need a source for "reduced standard" nuts.
These are 6-32 thread, but 1/4 across the flats instead of 5/16 inch.
Prefer brass, but steel will work.
Only need about 50 so distributors with minimum orders are out.
Mouser is close, but no go.

Thanks for any suggestions,
Kaz