Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
I have worked out my own methods--but I am sure others may use that... good
post... Warmest regards, John "Tim Wescott" wrote in message ... John Smith wrote: I could be mistaken, but I think "cross posting" would be to enter a separate post to EACH newsgroup thread, separate from any other newsgroup thread... This avoids the following: Including multiple newsgroups in the posting of a single post--causes any reply to that post to be sent to ALL the newsgroups that single post has been posted to... Warmest regards, John Take the trouble to do a web search on the phrase "cross post" and you'll get not only a definition but an explaination of why it's better than multiple posting. -- ------------------------------------------- Tim Wescott Wescott Design Services http://www.wescottdesign.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Phase differences in direct conversion receivers | Homebrew | |||
Direct conversion receivers for AM | Homebrew | |||
Direct conversion receivers for AM | Homebrew | |||
Direct conversion spectrum analyser | Homebrew |