LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old July 5th 05, 04:30 PM
ZenSafari
 
Posts: n/a
Default Looking for Specialty Crystal Filter, Please Help

I am currently looking for a crystal filter in the CF range of 70 to
100MHz. I know that these are rare and are not standard for FM radio,
citizen's band, etc, but it would be most helpful for me to find one.
Ideally, the filter should have a passpand of +/-3.75kHz about the CF
(3dB). I've checked numerous manuf. who make these type of crystal
filters (FOX, ILSI, Raltron, MCF, etc) but most of their products are
vapor ware and have never been fabricated. Do any of you have a
suggestion of where I might find a filter that meets this spec? My goal
is to avoid another IF stage in my hardware...this is why I require the
narrow bandwidth at the high CF. Even if you have a suggestion of where
I might find a 70 to 100 MHz CF filter with a wider bandwidth I would
appreciate it very much.

Thanks for the help.

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
NC-173 Crystal Filter Jack Boatanchors 0 June 1st 05 04:10 AM
Kenwood YG-455CN-1 crystal filter, AR7030 & too many daughters [email protected] Shortwave 1 February 12th 05 05:58 AM
FS: CW Fox-Tango Crystal Filter for Yeasu FT-757GX / FT-767GX, 250 Hz Mike Nowlen Swap 0 July 19th 04 05:26 AM
Filter Design/Analysis program FREE with powerful crystal ladder designs Neil Homebrew 2 May 17th 04 08:44 AM


All times are GMT +1. The time now is 01:35 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017