Remember Me?
Menu
Home
Search
Today's Posts
Home
Search
Today's Posts
RadioBanter
»
rec.radio.amateur
»
Homebrew
>
TS-120
LinkBack
Thread Tools
Search this Thread
Display Modes
Prev
Next
#
2
July 27th 05, 05:45 AM
-ex-
Posts: n/a
wrote:
Hi all,
I have a TS-120
The 120 has a cal signal knob, I put the cal signal out on 14.2 MHz and
get S-3, on the 21.2, it back up to S-7. The best output is at 29.2
with a little over S-9.
I don't understand why it takes a dip in the 20 meter and in the JJY
band, since JJY band is for WWV at 15 MHz just above the 20 meter band
then it would use some of the same circuits.
It emitted smoke while
listening in the 20 meter band but not in the other bands.
As far as using a signal generator, I have a wavetek 3001, I could
determine a signal down to about -100dbm on 20 meters and down to about
-110 dbm on 15 meters.
That "smoke" part is very indicative of something wrong and should be a
good lead for troubleshooting!
-BM
Reply With Quote
Thread Tools
Search this Thread
Show Printable Version
Search this Thread
:
Advanced Search
Display Modes
Switch to Linear Mode
Switch to Hybrid Mode
Threaded Mode
Posting Rules
Smilies
are
On
[IMG]
code is
On
HTML code is
Off
Trackbacks
are
On
Pingbacks
are
On
Refbacks
are
On
All times are GMT +1. The time now is
03:19 AM
.
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
Contact Us
RadioBanter forum home
Privacy Statement
Copyright © 2017
LinkBack
LinkBack URL
About LinkBacks