RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Homebrew (https://www.radiobanter.com/homebrew/)
-   -   My Homebrew gear (https://www.radiobanter.com/homebrew/75777-my-homebrew-gear.html)

William E. Sabin August 4th 05 03:32 PM

My Homebrew gear
 
A picture and brief discussion of my homebrew HF receiver and transmitter
are on QRZ.COM.

Bill W0IYH



Harold E. Johnson August 4th 05 03:40 PM


"William E. Sabin" wrote in message
news:1GpIe.236642$xm3.51767@attbi_s21...
A picture and brief discussion of my homebrew HF receiver and transmitter
are on QRZ.COM.

Bill W0IYH


Very handsome Bill. Is that 40+ volt supply internal to the transmitter
cabinet? Any blowers involved?

Regards
W4ZCB



Harold E. Johnson August 4th 05 06:01 PM


"Harold E. Johnson" wrote in message
news:hNpIe.220263$_o.151253@attbi_s71...

"William E. Sabin" wrote in message
news:1GpIe.236642$xm3.51767@attbi_s21...
A picture and brief discussion of my homebrew HF receiver and transmitter
are on QRZ.COM.

Bill W0IYH


Very handsome Bill. Is that 40+ volt supply internal to the transmitter
cabinet? Any blowers involved?


Belay the last, just remembered the blower on the MRF-150's!

Regards
W4ZCB




William E. Sabin August 4th 05 06:02 PM

Yes, the 47 V 8A series regulator supply is in the big cabinet. It also has
all of the protections for the MRF150 transistors. Also a fan for the 100W
amplifier module. The transmitter is completely self-contained.

There is no attempt at miniaturization. I don't have the time or patience
for that level of effort. Each radio is a "test bed" and not a finished
product. Just this morning I made two circuit improvements in the receiver.
I recently rebuilt the 3.395 MHz IF amp module and the AGC processor module
to get rid of a rat's nest of "fixups" and haywire. It looks pretty good
now.

I do admire the tremendous effort that goes into the compact transceivers,
but I don't want to duplicate it. It is the basic radio communications
functionality that I care about.

Bill W0IYH

"Harold E. Johnson" wrote in message
news:hNpIe.220263$_o.151253@attbi_s71...

"William E. Sabin" wrote in message
news:1GpIe.236642$xm3.51767@attbi_s21...
A picture and brief discussion of my homebrew HF receiver and transmitter
are on QRZ.COM.

Bill W0IYH


Very handsome Bill. Is that 40+ volt supply internal to the transmitter
cabinet? Any blowers involved?

Regards
W4ZCB




[email protected] August 5th 05 04:48 AM

Bill: Very nice! It was a pleasure to look at the pictures and read
about your work. Very FB! 73
Bill
M0HBR N2CQR CU2JL
http://planeta.clix.pt/n2cqr


[email protected] August 5th 05 04:49 AM

Bill: Very nice! It was a pleasure to look at the pictures and read
about your work. Very FB! 73
Bill
M0HBR N2CQR CU2JL
http://planeta.clix.pt/n2cqr


[email protected] August 5th 05 04:49 AM

Bill: Very nice! It was a pleasure to look at the pictures and read
about your work. Very FB! 73
Bill
M0HBR N2CQR CU2JL
http://planeta.clix.pt/n2cqr


William E. Sabin August 5th 05 09:29 AM

Thanks Bill and 73

Bill W0IYH

wrote in message
oups.com...
Bill: Very nice! It was a pleasure to look at the pictures and read
about your work. Very FB! 73
Bill
M0HBR N2CQR CU2JL
http://planeta.clix.pt/n2cqr





All times are GMT +1. The time now is 02:53 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com