Menu

Help with Heath SB200

Search this Thread

Prev

Previous Post

Next Post

Next

#5

Report Post

Old

December 16th 05, 01:51 PM posted to rec.radio.amateur.homebrew

Gary P. Fiber

Posts: n/a

Default

Help with Heath SB200

On 14 Dec 2005 15:04:47 GMT, (Chuck
Sherwood) wrote:

I have a Heath SB200 that has been modified a bit too much.
Someone replaced the stock fan with a muffin fan and they
cut a big hole for the fan in the RF chamber.

I want to replace the muffin fan with a fan resembling the
stock fan. Grainger sells motor and fan blades for appliances
that look close enough. I just need some data to choose the
right one. Most import is the fan blade size. Second would
be any specs for the motor. Stock motors range from 1/500Hp
to 1/20 HP. I suspect one of the smallers one based on physical
size.

Also the meter seems to stick in a couple spots. I don't
see anything obvious like a bent needle. Any hope of finding
a similar meter that I can move the faceplate? Any place that
can repair meters?

All help appreciated.
thanks
chuck
For plastic meter faces get a soft cloth and some liquid dishwashing
detergent. Use the detergent straight, no water and wipe the meter and
then buff so none remains. This has worked for years on the heath VTVM
when static builds up.

Gary

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Heath SB200	Chuck Sherwood	Equipment	7	December 15th 05 04:53 PM
Heath gear !	M. Kassay	Boatanchors	0	July 5th 05 09:03 PM
Heath gear !	M. Kassay	Swap	0	July 5th 05 09:03 PM
Heathkit manuals	M. Kassay	Boatanchors	0	June 25th 05 03:08 AM
FA: Heath Heathkit Cheyenne AM/CW Transmitter + AC Power Supply	SomeDetritus	Swap	0	February 21st 04 01:18 AM

All times are GMT +1. The time now is 02:36 AM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017