| Home |
| Search |
| Today's Posts |
|
|
|
#1
December 19th 05, 07:18 AM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
HP 11593A specification?
Looking for a specification of the HP 11953A termination resistor (BNC).
Measurements of two different units indicate R=51,3 Ohms. I would have expected something closer to 50 Ohm. Yes, the ohmmeter is calibrated... Christer SM6PXJ |
|
#2
December 19th 05, 07:39 PM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
|
HP 11593A specification?
Looking for a specification of the HP 11953A termination resistor (BNC).
Measurements of two different units indicate R=51,3 Ohms. I would have expected something closer to 50 Ohm. Yes, the ohmmeter is calibrated... ===================== What is the uncertainty of your ohm meter ? If it is a DVM then apart from the uncertainty the actual value is plus/minus 1 of the least significant digit. You really have to define 'Ohm meter is calibrated' Frank KN6WH / GM0CSZ (currently in California) |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WiMAX 802.16a specification | Antenna | |||
| Where's The Specification, Brain? | Policy | |||
| Specification for Antena tuners-radio interfaces | Equipment | |||
| Specification for Antena tuners-radio interfaces | Antenna | |||
| Specification for Antena tuners-radio interfaces | Homebrew | |||
Hybrid Mode
