| Home |
| Search |
| Today's Posts |
|
#5
January 12th 06, 09:32 AM
posted to rec.radio.amateur.homebrew
|
|||
|
|||
Dual jfet
"Roy Lewallen" wrote in message ... If you match both Idss and Vp, they'll have the same Gm at all currents -- in theory. Roy Lewallen, W7EL Steve Nosko wrote: Depends on the particular application, but this sounds reasonable. However, rather than IDss, I'd shoot for what ever bias current they are operated at, though IDss may work, 73, K,9.D;C'I "Ken Scharf" wrote in message . .. I'm building a circuit that calls for a dual monolithic jfet. Can I use two discrete jfets that I have matched for IDSS in the circuit? They are in TO92 plastic cases, I can glue the two in contact with each other so they end up at the same temperature. i have u401 and e402 dual fets, new but unused. any use to you? martyn G0THY |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| are the GRUNDIG YB550 / TECSUN PL230 dual conversion? | Shortwave | |||
| Dual roller inductor for antenna tuner or amplifier | Boatanchors | |||
| BOLO STOLEN XTL5000 mobiles here are serials and models | Swap | |||
| FS: NEVER USED COMET DUAL BAND ANTENNA SYSTEM | Swap | |||
| FS: NEW COMET DUAL BAND MOBILE ANTENNA SYSTEM | Swap | |||
Threaded Mode
