Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
In article ,
Risto Tiilikainen wrote: If you think the situation in short waves today: Russian and their previous satellite country jammers are quiet Local broadcast is nearly completely in FM Propaganda is no more effective to transmit in short waves Commercial data is practically in Internet. and in satellites Marine communication is in satellites. All this means less cross modulation products in first mixer than some sixteen years ago Atmospheric noise in sw is much higher than the noise of modern front and mixer stage Advantage of diode mixer is marginal There's a good discussion about the advantages and disadvantages of various mixer types, for different applications, in "Experimental Methods in Radio Frequency Design", a book I strongly recommend. As others have pointed out, there's no one right solution. Even for use in what seems like a simple, constant application (e.g. a CW receiver for the 40-meter band), the choice of which is more appropriate can swing one way or the other based on how you intend to use the receiver. As one example given in EMiRFD, if you're looking for a simple receiver which is intended for QRP operation on backpacking trips, then the low power consumption, and the mixer gain of an active mixer such as a Gilbert cell (e.g. SA602 and similar) can make this the ideal. Out in the woods, the RF levels will be low, and the relatively low IP3 of these sorts of mixers isn't likely to be a problem. On the other hand, if you're planning to build a receiver which may have to operate in a strong-adjacent-signal environment (e.g. for Field Day or other contesting), then you may want to favor a diode-ring double-balanced mixer operating at a high LO-injection level, and the devil take the power consumption :-) The FET-switch mixers seem to be a really nice alternative, and although they've gotten relatively little visibility in amateur-radio applications they've become very popular in commercial use (e.g. cell-phone handsets). I haven't yet had a chance to play with these myself but they look like fun! -- Dave Platt AE6EO Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior I do _not_ wish to receive unsolicited commercial email, and I will boycott any company which has the gall to send me such ads! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
40673 dual gate mosfet | Shortwave | |||
are the GRUNDIG YB550 / TECSUN PL230 dual conversion? | Shortwave | |||
XTAL oscillator with a XOR gate | Homebrew | |||
XTAL oscillator with a XOR gate | Homebrew |