LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old April 13th 06, 05:40 PM posted to rec.radio.amateur.homebrew
You
 
Posts: n/a
Default Lowering the noise figure in a preamp

In article .com,
"K7ITM" wrote:

As a point of reference, a typical NE3508M04
(http://www.cel.com/pdf/datasheets/ne3508m04.pdf) can give you a device
noise figure under 0.4dB, operated at room temperature, at any
frequency across the entire "UHF" frequency range (300MHz to
3GHz)--better than that at the lower end of the frequency range.

Cheers,
Tom


Nothing like a Ruby Maser dumped in Liquid Nitrogen and pumped at
-12 DBm to bring in those extremely small signals........

all it takes is cold......
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PreAmp Noise Figure of the GRE preamps. GeorgeF Scanner 0 January 7th 05 12:22 PM
Noise Figure Measurements Steve Kavanagh Homebrew 25 October 20th 04 04:14 AM
Icom 746pro Testimonial Pilotbutteradio Shortwave 1 September 29th 04 12:47 PM
Automatic RF noise cancellation and audio noise measurement Dave Shrader Homebrew 35 August 11th 03 01:07 AM
CCIR Coefficients METHOD 6 REC533 // AUCKLAND --> SEATTLE http://CBC.am/ Shortwave 0 July 16th 03 08:21 AM


All times are GMT +1. The time now is 03:10 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017