| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
On Sun, 1 Jan 2012 12:57:50 EST, Steve Bonine wrote:
So where in the US are these manufactured? Varian still sells them - their plant was in Utah the last time I looked. These are "jugs" the size of wastebaskets with prices to match. There are two tube rebuilders in California who serve the broadcast transmitters world-wide as well. I also suspect that klystrons, TWTs, and magnetrons are in that mix, but 6SN7-s are not. -- 73 de K2ASP - Phil Kane From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon e-mail: k2asp [at] arrl [dot] net |
|
#2
|
|||
|
|||
|
In article ,
Phil Kane wrote: Varian still sells them - their plant was in Utah the last time I looked. These are "jugs" the size of wastebaskets with prices to match. There are two tube rebuilders in California who serve the broadcast transmitters world-wide as well. I also suspect that klystrons, TWTs, and magnetrons are in that mix, but 6SN7-s are not. Everything I tend now is solid state except for four transmitters that use one each of Eimac 8990 for output. Econco (in Woodland, last I check) still rebuilds those. I haven't used anything smaller than 8990 for some years. I know they're thousands of dollars new, but I haven't bought a new one in ages. -- John Higdon +1 408 ANdrews 6-4400 |
|
#3
|
|||
|
|||
|
On Mon, 2 Jan 2012 00:24:30 EST, John Higdon wrote:
Varian still sells them - their plant was in Utah the last time I looked. These are "jugs" the size of wastebaskets with prices to match. There are two tube rebuilders in California who serve the broadcast transmitters world-wide as well. I also suspect that klystrons, TWTs, and magnetrons are in that mix, but 6SN7-s are not. Everything I tend now is solid state except for four transmitters that use one each of Eimac 8990 for output. Econco (in Woodland, last I check) still rebuilds those. The two rebuilders to whom I was referring were of course Econco and Svetlana. Econco, Eimac, and Varian's former vacuum tube business are now all part of Communication & Power Industries of Palo Alto. --- Phil Kane Beaverton, OR |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Where to put all the vacuum tubes? 6/7 | Radio Photos | |||
| Where to put all the vacuum tubes? 1/7 | Radio Photos | |||
| ESRC Vacuum Tubes - Vacuum Tubes & Tube Part Supplier | Boatanchors | |||
| FS: Electron Tubes/ Vacuum Tubes/ radiotron/ RCA, GE, Tung-Sol , Vintage | Swap | |||
| FS: Electron Tubes/ Vacuum Tubes/ radiotron/ RCA, GE, Tung-Sol , Vintage | Equipment | |||