Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 7th 20, 05:43 PM posted to rec.radio.amateur.moderated,aus.radio.amateur.misc,rec.radio.amateur.dx
external usenet poster
 
First recorded activity by RadioBanter: Mar 2017
Posts: 30
Default [VK1NAM] Construction Project - Drive-on lightweight mast support


Amateur Radio - Get out of the Radio Shack and Live Life

///////////////////////////////////////////
Construction Project - Drive-on lightweight mast support

Posted: 06 Feb 2020 05:50 PM PST
https://vk1nam.wordpress.com/2020/02...-mast-support/

Inspiration for this project came from Craig WB3GCK, all credits to
Craig 🙂 Firstly, this device is not SOTA compliant, however the drive-on
mast support is an excellent way to support a lightweight telescopic pole
and HF or VHF antenna for a Field Day, Parks or WICEN (EMCOM) deployment.
Position a car wheel on the

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[VK1NAM] Antenna Project - 2m 145 MHz Rectangular Loop VK1NAM via rec.radio.amateur.moderated Admin Equipment 0 September 29th 19 03:56 PM
[VK1NAM] SOTA - Lightweight Portable 2m - 70cm Dipole Antenna #2 VK1NAM via rec.radio.amateur.moderated Admin Dx 0 April 8th 19 04:31 PM
How to drive a mast down the road - DIY Scott Fratcher Antenna 1 January 19th 10 10:11 PM
WTB: LOWER MAST SUPPORT HAM III G E BLANKENSHIP Swap 1 November 20th 03 10:40 PM


All times are GMT +1. The time now is 03:45 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017