I really don't know. What's the file extension?

VSD

I assume the transparencies should be printed backwards so the printed
surface can face the mounting material.

"William Sommerwerck" wrote in message
. ..
I really don't know. What's the file extension?

VSD

I assume the transparencies should be printed backwards so the printed
surface can face the mounting material.


Don't think that would be a problem, since it's a simple matter to 'mirror'
the image before printing, or even in the print queue IIRC.

"Brenda Ann" wrote in message
news

"William Sommerwerck" wrote in message
. ..
I really don't know. What's the file extension?

VSD

I assume the transparencies should be printed backwards so the printed
surface can face the mounting material.


Don't think that would be a problem, since it's a simple matter to
'mirror' the image before printing, or even in the print queue IIRC.


Just did some experimentation.

First, I cropped out everything but one meter shot (did this for both
meters). Then, I made sure that the size matched the graticules on the ruler
in the shot. Next, I turned off the color rendition in my photo app, and
mirrored the image so that the printing would be on the back side of the
transparency when attached to the meter face. I ran both of these to my
laser printer and printed them onto transparencies. Of the two, the one
where the color had been removed from the original turned out better, with
much less background clutter from the original color scan.

If your original meter face is indeed ~60.8mm, I can send you these
transparencies and you can see if they suit you. If so, I can have you scan
the dial(s) and e-mail those to me, and I can do the same for them, and send
those to you, too. Please let me know.

Brenda Ann

Try this image:
http://www.ppinyot.com/Hallicrafters...l%20covers.bmp

The most critical image I need contains the word "BAND". It has to be on
clear matereial as not to distort the Band scale image under it.

It would be fantastic if the Overhead transparency will work with out
distortion. The preveous images are on origonal traslucent celluloid or
other brown/amber material.

Thanks,

Paul P.

Are you receiving my emails?

PP

"Paul P" REMOVE paul @ REMOVE ppinyot . REMOVEcom wrote in message
newsa3Jj.18716$bC6.14084@trnddc08...
Are you receiving my emails?

PP

I did receive your e-mails. I can't use the bitmaps, as they are much
larger than your original dials and I would need exact dimensions so that I
could resize them. I downloaded a trial copy of Visio, and it will not open
the files from your website, so I will need you to e-mail me the original
vsd files of what you want printed out.

so I will need you to e-mail me the original
vsd files of what you want printed out.



ON the way.....Thanks.
Paul P.