Me wrote:
It's just trying to receive EDACS trunking without a scanner that
tracks it. After they unkey the repeater stays up a few secs with the
beeps. With a EDACS scanner you shouldn't hear it if it's programmed
correct..



On Sat, 29 Jul 2006 03:56:03 GMT, Reed wrote:


sting2602 wrote:

I just received an old radio shack pro-26 scanner from a friend at work.
my boss programmed all the frequencies into the scanner. my problem is
that evey time sometime quits talking there 3 beeps lasting about 3
seconds, which means the traffic of the responding person is always
missed. there is a delay button on the scanner and i made sure i
deactivated it on all the channels but there still is a 3 second delay.





Well, I have a Pro-26, and it has never done anything like this. Also
reviewing the manual just now, I see nothing about "3 beeps" in any
mode. If this is happening on any freq regardless of band or agency, I
suspect the radio is defective. If it is only coming from 1 agency's
channels, then it is a product of their system.

--reed


Agreed. The PRO-26 is not a tracker. So the OP is not hearing a response
likely because the conversation switched to another freq altogether.
..