LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old March 12th 07, 09:07 PM posted to rec.radio.scanner,alt.radio.scanner,alt.ham-radio.hf
external usenet poster
 
First recorded activity by RadioBanter: Mar 2007
Posts: 20
Default Carrier tones every 15 kHz in 10m band

Someone in my neighbourhood got a new toy for Christmas, and when they play
with it I get a noise repeating precisely every 200 kHz from about 4 MHz
though to 30 MHz - some places worse than others - i.e. around 8 and 15 MHz
they exceed S9. I have sent audio and spectrum recordings to a specialist in
RFI, who was able to determine that it is a switcing power supply, but just
which one and for what is still unknown.

All wiring in my subdivision, including telephone and cable TV is
underground. Other than satellite TV antennas the only visible antennas or
feedlines within at least half a mile are mine. When spring comes I'll try
to localise it with a portable receiver. It is definitely none of my
immediate, within 200 feet, neighbours. I suspect a plasma TV.

In the meantime I just have to avoid multiples of 200 kHz when whatever it
is is being used.

Dave

"Edmund H. Ramm" wrote in message
...
In "DougSlug"
writes:

I understand about the noise and harmonics a switcher can generate, but
the thing is that my antenna is mounted outside on a mast 25 feet up.
All the wiring in my neighborhood is underground.


The neighbours' tv aerials are also underground? The neighbours'
inhouse mains wiring is underground?

It's not clear to me how I could be getting such strong interference
in this case.


The rf energy creeps up the coax' braid and along the mains wiring and
is radiated from there.

My neighbour once had a switch mode psu which pegged my rx' s-meter
on 80m and was still about S5 1km away (spikes 100Hz apart).

QRM from el cheapo switching psus can possibly be cured on a one by
one basis, as hopefully there aren't too many of them. As all and sundry
have at least one tv set at home, QRM from the line output stages has to
be endured or somehow be reduced at the receiving end (notch filter et
al).
If it's any consolation to you, the latter type of QRM will gradually fade
away as more and more flat-screen tv sets enter homes, and will be
replaced
by a much more horrible QRM when said flat-screen is of the plasma
variety.

73, Eddi ._._.
--
e-mail: dk3uz AT darc DOT de | AMPRNET:
If replying to a Usenet article, please use above e-mail address.
Linux/m68k, the best U**x ever to hit an Atari!



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pl tones FLYFISHING PI Scanner 0 August 7th 04 01:48 PM
control tones on FRS PDRUNEN CB 2 June 21st 04 02:02 AM
Need "PL" tones, Burlington Co, NJ VHFRadioBuff Scanner 1 January 9th 04 04:08 PM
Does FRS and Ham radio use the same PL tones?? private Scanner 3 October 31st 03 11:46 AM
Tones Alan Lansburger CB 9 August 4th 03 01:37 PM


All times are GMT +1. The time now is 08:12 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017