I have a RS PRO-83 scanner - I have very little knowledge but have managed
to program the frequencies I want to monitor and have it set to scan those
and the skywarn channel.

I'm hoping someone can either tell me this happens to everyone or can tell
me how to stop it - when I'm listening to a transmission, every 3rd or 4th
word seems to be dropped. It's very frustrating, like "911 call from --- ---
Road. Caller says --- ---- three times today."

Is it me, my settings or just how it is? I do have a delay setting and the
'DLY' only shows on the readout when a transmission is happening and
disappears when scanning. I've tried turning delay on and off and this
happens either way.

Any help - thanks!

Mary

As Evan wrote, it is probably the prioroty setting. It looks at the prioroty
channel every 3-5 seconds.

Rob

"Evan Platt" wrote in message
...
On Thu, 9 Aug 2007 14:11:36 -0500, "MEH"
wrote:

I have a RS PRO-83 scanner - I have very little knowledge but have managed
to program the frequencies I want to monitor and have it set to scan those
and the skywarn channel.

I'm hoping someone can either tell me this happens to everyone or can tell
me how to stop it - when I'm listening to a transmission, every 3rd or 4th
word seems to be dropped. It's very frustrating, like "911 call
from --- ---
Road. Caller says --- ---- three times today."

Is it me, my settings or just how it is? I do have a delay setting and
the
'DLY' only shows on the readout when a transmission is happening and
disappears when scanning. I've tried turning delay on and off and this
happens either way.

Any help - thanks!

I don't know the pro-83. But look for a priority setting either
Priority, priority weather, etc.
--
To reply via e-mail, remove The Obvious from my e-mail address.

R1rob wrote in message ...
As Evan wrote, it is probably the prioroty setting. It looks at the prioroty
channel every 3-5 seconds.

Rob

"Evan Platt" wrote in message
...
On Thu, 9 Aug 2007 14:11:36 -0500, "MEH"
wrote:


I don't know the pro-83. But look for a priority setting either
Priority, priority weather, etc.
--
To reply via e-mail, remove The Obvious from my e-mail address.


aHa! Thanks for the idea. I'll check it!

"MEH" wrote in message
...
I have a RS PRO-83 scanner - I have very little knowledge but have managed
to program the frequencies I want to monitor and have it set to scan those
and the skywarn channel.

I'm hoping someone can either tell me this happens to everyone or can tell
me how to stop it - when I'm listening to a transmission, every 3rd or 4th
word seems to be dropped. It's very frustrating, like "911 call
from --- --- Road. Caller says --- ---- three times today."

Is it me, my settings or just how it is? I do have a delay setting and
the 'DLY' only shows on the readout when a transmission is happening and
disappears when scanning. I've tried turning delay on and off and this
happens either way.

Any help - thanks!

Mary

I've been putting up with this situation for about the past year - so THANK
YOU so much for the advice. This WAS the issue

Thanks, thanks, thanks!