Big mistake, for these scanners you need butels ARc250 from scannermaster.

"GeorgeF" wrote in message
news:3F074A60.5020608@licensed4funREMOVEBEFOREFLIG HT.com...
I just purchased Scancat Gold SE but am having problems using it with
both my BC250D and BC785D's.

I can get Scancat Gold to read all the banks and program banks just fine.

John wrote:
Big mistake, for these scanners you need butels ARc250 from scannermaster.



I have looked at the Butel before buying Scancat. It appeared the
Scancat had a
better 'search' and 'Survelience' modes with its audio recording. This
is the
ONLY real function I wanted Scancat for as I do not use software to do
normal scanning
or programming as I have written my own software for programming (which
does a much
better job than ScanCat)....

So far I'm not too happy.

Just for the hell of it last night I tried to program in a trunk system
using
ScanCat. When programming the BC250D it screwed up EVERY talkgroup!
They were
correct in teh ScanCat software but when writing them to the scanner
it wrote everyone as 00-013!

George
http://www.MilAirComms.com

ARC250PRO has audiorecording/logging and gives you 200 extended search
ranges, it logs in a history file so you can leave it running all day.
Scancat it total crap.

"GeorgeF" wrote in message
news:3F086168.9020405@licensed4funREMOVEBEFOREFLIG HT.com...


John wrote:
Big mistake, for these scanners you need butels ARc250 from
scannermaster.



I have looked at the Butel before buying Scancat. It appeared the
Scancat had a
better 'search' and 'Survelience' modes with its audio recording. This
is the
ONLY real function I wanted Scancat for as I do not use software to do
normal scanning
or programming as I have written my own software for programming (which
does a much
better job than ScanCat)....

So far I'm not too happy.

Just for the hell of it last night I tried to program in a trunk system
using
ScanCat. When programming the BC250D it screwed up EVERY talkgroup!
They were
correct in teh ScanCat software but when writing them to the scanner
it wrote everyone as 00-013!

George
http://www.MilAirComms.com

Where can you get this ARC250PRO? Dose this
software work on the BC245 & BC780?

Scancat is hard to learn and not easy to work with.

I do like the Scanstar TrunkStar 780. You buy the
Scanstar software and get free updates and they
are always improving their softare.

Steve


"John" wrote in message
...

ARC250PRO has audiorecording/logging and gives you 200 extended search
ranges, it logs in a history file so you can leave it running all day.
Scancat it total crap.

"GeorgeF" wrote in message
news:3F086168.9020405@licensed4funREMOVEBEFOREFLIG HT.com...


John wrote:
Big mistake, for these scanners you need butels ARc250 from
scannermaster.



I have looked at the Butel before buying Scancat. It appeared the
Scancat had a
better 'search' and 'Survelience' modes with its audio recording. This
is the
ONLY real function I wanted Scancat for as I do not use software to do
normal scanning
or programming as I have written my own software for programming (which
does a much
better job than ScanCat)....

So far I'm not too happy.

Just for the hell of it last night I tried to program in a trunk system
using
ScanCat. When programming the BC250D it screwed up EVERY talkgroup!
They were
correct in teh ScanCat software but when writing them to the scanner
it wrote everyone as 00-013!

George
http://www.MilAirComms.com

You can find it at www.butel.nl. Support is EXCELLENT! I personally
haven't used ARC250, but their other versions are great.

The 780 would use ARC780. Don't believe they have anything for the
245, but you should ask them.

On Mon, 07 Jul 2003 00:09:08 GMT, "SB" wrote:

Where can you get this ARC250PRO? Dose this
software work on the BC245 & BC780?

No you need TrunkStar785D for the Uniden® BC250D & BC785D
http://www.scanstar.com/products/trunkstar785.htm
And the best part about this software, it works, wowya now theirs a
concept!!!



"John" wrote in
:


ARC250PRO has audiorecording/logging and gives you 200 extended search
ranges, it logs in a history file so you can leave it running all day.
Scancat it total crap.

"GeorgeF" wrote in message
news:3F086168.9020405@licensed4funREMOVEBEFOREFLIG HT.com...


John wrote:
Big mistake, for these scanners you need butels ARc250 from
scannermaster.



I have looked at the Butel before buying Scancat. It appeared the
Scancat had a
better 'search' and 'Survelience' modes with its audio recording. This
is the
ONLY real function I wanted Scancat for as I do not use software to do
normal scanning
or programming as I have written my own software for programming (which
does a much
better job than ScanCat)....

So far I'm not too happy.

Just for the hell of it last night I tried to program in a trunk system
using
ScanCat. When programming the BC250D it screwed up EVERY talkgroup!
They were
correct in teh ScanCat software but when writing them to the scanner
it wrote everyone as 00-013!

George
http://www.MilAirComms.com








--
That Other George

Please send your spam to:

http://webpages.charter.net/moment/

http://webpages.charter.net/moment/winjunk.htm

No you need Signal Intelligence: TrunkStar7805D™ is a high-performance,
full-featured software package for Uniden® BC785D and BC250D digital
trunking scanners. Data management and operational control over the scanner
is provided http://www.scanstar.com/products/trunkstar785.htm

:-)

Big mistake, for these scanners you need butels ARc250 from
scannermaster.



--
That Other George

Please send your spam to:

http://webpages.charter.net/moment/

http://webpages.charter.net/moment/winjunk.htm