is there any way of making one or converting a icom lead

The Icom lead does the job...

"Kevin" wrote in message
...
is there any way of making one or converting a icom lead

Ah right will download the software again as it didnt seem to work first
time round


Thx

Ok guys just downloaded software again and still no luck
when in clone mode the radio displays ok but when i try to read all data i
get this error msg

"A communication error occurred:1"


Any idea guys this is driving me nuts

the cable is one i used on my icom r2

thx

In article ,
says...
Ok guys just downloaded software again and still no luck
when in clone mode the radio displays ok but when i try to read all data i
get this error msg

"A communication error occurred:1"


Any idea guys this is driving me nuts

the cable is one i used on my icom r2

thx



I havent been following this thread but do you have the comm port set
right? Are you using a Serial-USB adapter? It could also be the cable
you are using is the wrong one.
--
Dwayne
http://groups.yahoo.com/group/BC895/

Com port is set to 1#
serial adapter - jack plug
i have been told that the icom lead i have will work earleir in this thread
still not 100% sure my self