LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
Old November 22nd 03, 06:24 PM
BDK
 
Posts: n/a
Default

In article , harryc56
lid says...
BDK, thanks for the reply. I think you may be onto something with the coax
or antenna. I stuck on a RS telescoping and I got to the nearest trunked
system no problem. So, I guess I'll check out the coax first (It's RG6/U),
then maybe try the scantenna. The discone is brand new, and the RG6 is a
couple of years old. Might try another straight run of coax. Is there an
easy way to test for loss on coax? I could just go right out to the discone
and run a short piece to the handheld I suppose.
Harryc
--
"BDK" wrote in message
...
In article , harryc56
lid says...
I have a Pro-95. I have a couple of Mot and Edacs trunking systems in

the
region. These are Police trunks in a town about 15 miles from here, and
another town about 20 miles away. I am running off of an antenna

warehouse
super discone. If I scan between 851.0 and 868.9875 I do not pick up any
strong repeaters, but otherwise I have no problem receiving as far at 40
miles away on conventional frequencies....much further on Ham. What

would be
the normal expected transmit range on an 800mhz trunked system/repeater?
Since I can't seem to pull in any strong repeaters, that should tell me

that
I need a better antenna, an 800mhz specific antenna, or to tune the

discone
somehow. Is my thought process valid? Any ideas?
Harryc
--



Well, just about ANY antenna is better than a discone, but you should
be able to get at least the closer of the two systems with the rubber
duck, let alone an outside antenna. You may be overloading the 95, and
that's why you can't hear anything. Try scanning the 800 PSB freqs with
the duck and see what happens. Maybe the coax on the discone has taken a
dive and hasn't gotten really bad yet, so the higher freqs are the only
ones affected so far.


For a better antenna, check out:

http://users.cis.net/kingpop/Scanner/Scantenna.htm

Can you hear anything on 800? You should be able to hear control
channels buzzing away somewhere, and that's all the 95 needs to trunk
track. My 93 has no problem getting local trunked when I am 15-20 miles
away with a replacement (MFJ dual band short duck) antenna, the original
got tweaked and I tossed it.

BDK





If it's new RG-6, and is even reasonably decent quality, it should be
ok. Some is ok at first, but only lasts a couple of years before it
starts getting real lossy, and 800 is going to be the first affected by
it when it starts to go. How many feet are you running?

BDK
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie CB User has ?'s Please someone advise Alex CB 62 October 12th 04 04:44 PM
Pro-94 How to set trunking. Alex Devlin Scanner 5 November 10th 03 10:49 PM
Newbie abr Homebrew 20 September 29th 03 04:07 PM
Newbie abr Homebrew 0 September 28th 03 06:46 PM
question about trunking Mike Scanner 1 August 12th 03 02:14 AM


All times are GMT +1. The time now is 10:22 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017