Bill Crocker ...

^ Check out eBay...

That's cruel.


^ ...search on YAGI ...

A Yagi is not difficult to construct, especially if it is for receiving only.
All that are needed are a wire clothes hanger, wire cutters, soldering iron,
and 50-75 ohm coax. Measure the driven element for about 900 MHz and visually
estimate the lengths of the remaining elements.

Frank

Frank 01c3e0d2$ea858a00$0125250a@czvmuxeghkikgbva...

^ All that are needed are a wire clothes hanger, wire cutters,
^ soldering iron, and 50-75 ohm coax.

Since the driven element can be a di-pole cut from the coax conductors, even
the soldering iron isn't necessary.

Frank