Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]() for the scanners and use a good RG 6, and RG 58 is fine for SW antennas that only are used up to 30mhz. or so Jeff Sounds good, don't want to spend a fortune and all three runs will be well under 50ft, probably more like 30 - 35 ft.. Going to suspend a B&W inverted vee from a 24 ft mast with the ground plane on top, then mount an AMRAD active vertical (if I ever get all the parts together and assemble it) to a sewer vent pipe on the roof. 9913 cable is a medium sized cable - approx 8mm in diameter, and is moderately expensive. Matt Yeah, I need cheap (don't see the need for expensive for a receive only ant) and small as I will have to fish it through some tight spaces to get were I'm taking it. Thanks guys, I haven't bought any coax or put up any antennas in 25 years, Rob Mills ~ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Antenna Question | CB | |||
Antenna Safety Question | Antenna | |||
Outdoor Antenna and lack of intermod | Scanner | |||
FS: Kenwood TMV7-A and Compet GP-9 base antenna | Equipment |