Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Yupiteuru 9000 Repair
I have a Yupiteru 9000 that has a problem with the squelch cutting out too
early. I used to be able to turn the dial from all the way to the left and then to about the 12 oclock position before the squelch would cut out, but now, if I turn all the way to the left and then turn just a little bit to the right, the squelch cuts out immediately. I can deal with it, but it seems like it could be fixed. Also, if it's plugged in to the wall and you bump the scanner, the power cuts off. Tried a different power supply and still does it. Never cuts off when it's running on just batteries. Any ideas would be appreciated... |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Yaesu Rotor Repair | Equipment | |||
Kenwood & Yaesu Repair Service | Equipment | |||
Kenwood 930/940 Repair Service | Boatanchors | |||
The Philco Repair Bench updates... | Boatanchors | |||
Export and Domestic Radio Repair AM/FM/SSB | CB |