Go to this site
http://www.strongsignals.net/index.cgi
and check out the FREQUENCY and TRUNKING
http://strongsignals.net/access/boards/trunking/board.cgi
http://strongsignals.net/access/boards/frequency/board.cgi
messages boards, go down the bottom, under the text pain.
Look over the resources for frequency and trunking systems in
your area of the country, to see if the 800 MHz band is trunked, then look at
the
trunk tracking models to see if they will support the trunking, that is work the
systems.
If after reviewing the FREQUENCY resources for your area ,you do not find any
800 MHz activity then this is
all a moot exercise.
If any of the systems mention APCO
and/or P-25, the APCO systems are both trunked and conventional.
You will need a digital trunk tracker scanner!
Be careful there are several other digital modes that are not covered
by the hobby digital trunk trackers.
DOWN LOAD A MANUAL BE FORE YOU BUY
It's great to have a manual for any electronic gear on the hard drive! It will
help you learn how to us the gear while your deciding to buy!
Also look at the specifications in the on line manual, match them
up to the systems. The advertisements will also tell you what systems/modes are
not supported.
The software programming is the best way to us the newer radios!
check out the software resources at stronsignals.net!
Then you can make a fully educated choice on weather you will want to purchase a
new trunk tracker scanner.
After purchasing a new digital trunk tracker either try selling the BC580, trade
it in on the new
radio, give it away or us it for conventional VHF UHF frequencies and keep the
trunking and/or digital commas
in the new radio.
Jim
JoeCap393 wrote:
Hi all,
I have a Uniden BC580, and I would love to pick up the 800mhz range. Is there
anything I can do to this model to accompolish this?
If not, what other models would you recommend for the casual user?
Thanks!
Joe
