Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
The big difference between the 5 and 6 is the CPU.
The 2006 uses a faster CPU for quicker scan times 26cps vs. 13cps, if I recall correctly. Aside from an extra bilateral switch in the 2006's squelch circuit, both are identical. Later versions of the 2006 use a light switch instead of a dimmer to conserve the EL panel's life. |
#2
![]() |
|||
|
|||
![]()
thanks.....Read a bit from Bob Parnass also.........
"N3KCT" wrote in message ... The big difference between the 5 and 6 is the CPU. The 2006 uses a faster CPU for quicker scan times 26cps vs. 13cps, if I recall correctly. Aside from an extra bilateral switch in the 2006's squelch circuit, both are identical. Later versions of the 2006 use a light switch instead of a dimmer to conserve the EL panel's life. |
#3
![]() |
|||
|
|||
![]() N3KCT wrote: The big difference between the 5 and 6 is the CPU. The 2006 uses a faster CPU for quicker scan times 26cps vs. 13cps, if I recall correctly. Aside from an extra bilateral switch in the 2006's squelch circuit, both are identical. Later versions of the 2006 use a light switch instead of a dimmer to conserve the EL panel's life. Both my 2005s scan at over 20cps - but I did cut the diode which slows down the scan speed. Dave |
#4
![]() |
|||
|
|||
![]()
what diode?
"Dave Holford" wrote in message ... N3KCT wrote: The big difference between the 5 and 6 is the CPU. The 2006 uses a faster CPU for quicker scan times 26cps vs. 13cps, if I recall correctly. Aside from an extra bilateral switch in the 2006's squelch circuit, both are identical. Later versions of the 2006 use a light switch instead of a dimmer to conserve the EL panel's life. Both my 2005s scan at over 20cps - but I did cut the diode which slows down the scan speed. Dave |
#5
![]() |
|||
|
|||
![]()
It was a long time ago so I had to look it up and found I did not cut a
diode but installed one. However the cellular enable required cutting a diode so: I removed D-502 to enable cellular, and used it as D-501 to increase scan speed. Don't cut or remove D-503 since that will decrease the scan speed. Dave Daphne + Dave wrote: what diode? "Dave Holford" wrote in message ... N3KCT wrote: The big difference between the 5 and 6 is the CPU. The 2006 uses a faster CPU for quicker scan times 26cps vs. 13cps, if I recall correctly. Aside from an extra bilateral switch in the 2006's squelch circuit, both are identical. Later versions of the 2006 use a light switch instead of a dimmer to conserve the EL panel's life. Both my 2005s scan at over 20cps - but I did cut the diode which slows down the scan speed. Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: scanner stuff | Scanner | |||
Advice on buying a scanner | Scanner | |||
Pro-95 Scanner | Scanner | |||
Coax signal deteriotion to Scanner | Scanner | |||
FS: scanner stuff | Scanner |