Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
I have a 2004 with the same problem. Program a specific frequency into a
memory channel, go to another channel, then come back to the channel you just programmed and you find it changed itself to something else. I've always presumed the scanner finally gave in to the cold solder joint dilemma. Over the past few years I've seen very few 2004s out there that worked 100% perfect. "Charles D. Mandus" wrote in message ... Hi all, I have a Pro-2004 and when I program a frequency, say 460.050 for our local police, I get 460.0516 on the display. Also, if I punch in 45.000, I get something like 76.5295. |
Thread Tools | Search this Thread |
Display Modes | |
|
|