Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi All,
I have a Uniden ubc72xlt. When I have the "Close Call" feature enabled in the background I get regular dropouts in the signal that I'm monitoring (every 3 or 4 seconds the signal is interrupted with a pulse of silence). As soon as I turn the "Close Call" feature off the dropouts dissapear. Just to make it extra clear: I'm not getting the dropouts in a signal which Close Call has locked onto, but just a normal signal that I'm monitoring, with Close Call in the background listening for signals. Is it normal for these scanners with Close Call to behave like this with the feature enabled, or is my scanner a dud in some way? Cheers in advance, Jake Simmonds. |
#2
![]() |
|||
|
|||
![]()
"jacob" wrote in message
oups.com... I have a Uniden ubc72xlt. When I have the "Close Call" feature enabled in the background I get regular dropouts in the signal that I'm monitoring (every 3 or 4 seconds the signal is interrupted with a pulse of silence).SNIP Is it normal for these scanners with Close Call to behave like this with the feature enabled, or is my scanner a dud in some way? This is normal behavior... The silence you here is when the scanner jumps over and quickly scans the frequency range(s) you have selected in the "close call" options... You will here this same thing if you were to turn on the "Priority" scan as well... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Open Letter to K1MAN | Policy | |||
Radio call letters: What do they mean? | Shortwave | |||
Get your Trophy US Extra Callsign (A KH0x call would be nice!) | Dx | |||
Get your Trophy US Extra Callsign (A KH0x call would be nice!) | Dx | |||
OLD motorola trunking information | Scanner |