Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
On Sat, 26 Nov 2005 11:38:08 -0500, "J. Mc Laughlin"
wrote: Problems with inconsistent volume with digital modulation are endemic. The cure is probably to be implemented post detection. Thank you for the observation that you have found the RS 2096 better at combating the problem than the BCD396T. If the BCD396T is dealing with inconsistent volume after detection, it is unlikely that a future change to the radio's "firmware" will help the problem. Since the 396's only AGC problem is an attack time that's too long by an order of magnitude or so, it can easily be fixed by a firmware change. The other main complaints were silk screen rub-off, which was due to a manufacturing glitch on some of the radios in the first production run, some early speaker failures, which Uniden replaced under warranty and some "distortion on low volume" complaints that don't seem to be very repeatable. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS : Radio SHack Pro-96 Digital Turnking Scanner | Swap | |||
The Broadcast Band in Digital Radio??? | Shortwave | |||
Digital scanner question | Scanner | |||
FS: Pro-96 Digital Scanner by Radio Shack | Scanner | |||
FS : Uniden BC250D Digital hand held scanner | Swap |