I have a pro 95 and I am currently monitoring a analog Motorola system
(Madison WI ) I am told that my pro 95 will not work on this system
after they reprogram. what scanners will work??? Uniden 246T ?


Thanks
Tom

When the band is redone, the FCC channel numbering scheme will change to
accomodate the NPSPAC channels (12.5 KHz offsets) in the lower 120
channels. Motorola's SmartNet controller transmits the FCC channel
number to the subscriber unit when assigning a talkgroup. The subscriber
radio calculates the frequency from the channel number. Unless the
firmware in the subscriber unit or scanner is updated, those receivers
will not know where to listen. Personally I would not buy a scanner
unless the manufacturer commits to a post rebanding firmware change.

Tom Humphrey wrote:

I have a pro 95 and I am currently monitoring a analog Motorola system
(Madison WI ) I am told that my pro 95 will not work on this system
after they reprogram. what scanners will work??? Uniden 246T ?


Thanks
Tom


--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"

"Follow The Money"

FCC re-banding info can be found he
http://www.apcointl.org/frequency/800hp.htm

Bill Crocker


"Tom Humphrey" wrote in message
...
I have a pro 95 and I am currently monitoring a analog Motorola system
(Madison WI ) I am told that my pro 95 will not work on this system after
they reprogram. what scanners will work??? Uniden 246T ?


Thanks
Tom

Thank You very much for your replies,now I know what direction to go
in......maybe


Tom





Tom Humphrey wrote:
I have a pro 95 and I am currently monitoring a analog Motorola system
(Madison WI ) I am told that my pro 95 will not work on this system
after they reprogram. what scanners will work??? Uniden 246T ?


Thanks
Tom