![]() |
jav-232 cable: where to get?
is there anywhere on this earth I can get a jav-232 cable?
www.javiation.com still says: 'Please Note that the JAV-232 is currently unavailable.' surely there might be somewhere else I could get one? |
jav-232 cable: where to get?
On Mon, 13 Feb 2006 23:36:54 -0000, "tg"
wrote: is there anywhere on this earth I can get a jav-232 cable? www.javiation.com still says: 'Please Note that the JAV-232 is currently unavailable.' surely there might be somewhere else I could get one? What are the connectors? Maybe some other cable will do the same job. (My Yaesu cable works on my Radio Shack scanner.) |
jav-232 cable: where to get?
In article , tg
writes Hi, is there anywhere on this earth I can get a jav-232 cable? www.javiation.com still says: 'Please Note that the JAV-232 is currently unavailable.' surely there might be somewhere else I could get one? The JAV-232 as listed on our web site was only ever available through us. As it stands at the moment I do still have some blank PCB's ready to populate however some of the original components used are no longer available. Alternatives are listed by the likes of Farnells but I have yet to check/confirm that they are of the same dimensions and/or will work in the same design. What radio was it primarily to be used with ? -- Cheers, JC Javiation http://www.javiation.co.uk |
jav-232 cable: where to get?
"Jonathan Clough, Javiation, Bradford, UK" wrote in message ... In article , tg writes Hi, snip What radio was it primarily to be used with ? thanks for your response. My scanner is an AR8200 MkII. I got myself a standard CC8200 (for the meantime) and modified it, changing the serial connector end into a breakout box with an audio jack but unfortunately there's no squelch/mute on the audio, and I would like a cable that can give me this. |
jav-232 cable: where to get?
"Al Klein" wrote in message ... On Mon, 13 Feb 2006 23:36:54 -0000, "tg" wrote: is there anywhere on this earth I can get a jav-232 cable? www.javiation.com still says: 'Please Note that the JAV-232 is currently unavailable.' surely there might be somewhere else I could get one? What are the connectors? PC serial port plug to breakout box, picture he http://www.javiation.co.uk/javint.html more details here http://www.javiation.co.uk/manuals/jav-232.doc Maybe some other cable will do the same job. I haven't seen a cable yet that will do the same as the jav-232. If there is another cable I'd be grateful to know about it. |
jav-232 cable: where to get?
On Wed, 15 Feb 2006 23:41:52 -0000, "tg"
wrote: PC serial port plug to breakout box, picture he http://www.javiation.co.uk/javint.html more details here http://www.javiation.co.uk/manuals/jav-232.doc There are *many* RS232/TTL cables available. Look on Don Starr's cable page http://www.starrsoft.com/software/Win96/Cables/cables.html to start. |
jav-232 cable: where to get?
"Al Klein" wrote in message ... On Wed, 15 Feb 2006 23:41:52 -0000, "tg" wrote: PC serial port plug to breakout box, picture he http://www.javiation.co.uk/javint.html more details here http://www.javiation.co.uk/manuals/jav-232.doc There are *many* RS232/TTL cables available. Look on Don Starr's cable page http://www.starrsoft.com/software/Win96/Cables/cables.html to start. thanks but this page seems to be only for Radio Shack scanners and mine is an AOR scanner with the special Options socket. |
jav-232 cable: where to get?
On Thu, 16 Feb 2006 13:20:30 -0000, "tg"
wrote: "Al Klein" wrote in message ... On Wed, 15 Feb 2006 23:41:52 -0000, "tg" wrote: PC serial port plug to breakout box, picture he http://www.javiation.co.uk/javint.html more details here http://www.javiation.co.uk/manuals/jav-232.doc There are *many* RS232/TTL cables available. Look on Don Starr's cable page http://www.starrsoft.com/software/Win96/Cables/cables.html to start. thanks but this page seems to be only for Radio Shack scanners and mine is an AOR scanner with the special Options socket. RS-232 is RS-232, TTL is TTL. Wiring a plug adapter is the easy part. |
jav-232 cable: where to get?
"Al Klein" wrote in message ... On Thu, 16 Feb 2006 13:20:30 -0000, "tg" wrote: "Al Klein" wrote in message ... On Wed, 15 Feb 2006 23:41:52 -0000, "tg" wrote: PC serial port plug to breakout box, picture he http://www.javiation.co.uk/javint.html more details here http://www.javiation.co.uk/manuals/jav-232.doc There are *many* RS232/TTL cables available. Look on Don Starr's cable page http://www.starrsoft.com/software/Win96/Cables/cables.html to start. thanks but this page seems to be only for Radio Shack scanners and mine is an AOR scanner with the special Options socket. RS-232 is RS-232, TTL is TTL. Wiring a plug adapter is the easy part. with an AOR control lead (CC8200) there is a small circuit board tucked inside the serial port plug housing, it's not a case of just wiring a plug adaptor although I wish it was. I expect the jav-232 cable (if it ever exists again) would contain even more circuitry. Soldering sections togther is easy. Getting hold of the sections - that's the hard part. |
jav-232 cable: where to get?
On Fri, 17 Feb 2006 01:04:27 -0000, "tg"
wrote: "Al Klein" wrote in message ... RS-232 is RS-232, TTL is TTL. Wiring a plug adapter is the easy part. with an AOR control lead (CC8200) there is a small circuit board tucked inside the serial port plug housing Same with all other RS-232 to TTL converters. just wiring a plug adaptor although I wish it was. I expect the jav-232 cable (if it ever exists again) would contain even more circuitry. Soldering sections togther is easy. Getting hold of the sections - that's the hard part. The cables on Don's site make it easy - they do the level conversion. All you have to do is the connector conversion. I haven't seen a schematic of the jav-232, but I'd be veru surprised if it was anything more than a bidirectional level converter. |
jav-232 cable: where to get?
In article , Al Klein
writes The cables on Don's site make it easy - they do the level conversion. All you have to do is the connector conversion. I haven't seen a schematic of the jav-232, but I'd be veru surprised if it was anything more than a bidirectional level converter. The JAV-232 "at its core" is, as you suggest a biredectional level convertor using a MAX IC. Rather than have a "model specific" cable/connector (for example the AOR 8200PC) we put a standard DIN plug on the top that can be used to make up any number of cables to connect to any model requiring TTL. The JAV- 232 manual gives details of the connections needed for what radio and only basic soldering skills are needed to make up cables as and when needed. You could have a number of models that require a TTL interface and make use of just the one interface. When it comes to the AOR models originally designed for the AR8000 hence the FFC connector and cable, we also included in the JAV-323 a squelch tape recorder relay, audio output and with the AR8200 a discriminator output. With the one connection to the AR8200 for example you have RS232/TTL data (with squelch detect too), tape recorder relay and audio output together with discriminator feed. -- Cheers, JC Javiation - Scanners & receivers from all the leading manufacturers Telephone 01274 639503 International: +44 1274 639503 http://www.javiation.co.uk |
All times are GMT +1. The time now is 09:09 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com