About Us

March 20th 06, 12:02 AM posted to rec.radio.scanner

On Sun, 19 Mar 2006 13:50:54 GMT, wrote:

Have any web locations for older decoders with source? I've been
looking but cant find the source, realizing its mostly in
visual basic I think. But moving it over to something else shouldnt
be that hard.

Most of what I was thinking of was written in 8080 assembly.

I
doubt that I could find my old 8" floppies or, even if I could, if I
could find anything that could read them.

But here's the program in English - translate it to whatever language
you need:

For ASCII, input the bits, starting with the start bit. Keep the next
8 bits. Assemble them into a byte. You're done - that's the
character.

Oh, there's a stop bit - either use it as a verification bit - if it's
missing, skip the character because something's wrong - or throw it
away.

You can find a bit-banger routine he
http://www.ganssle.com/articles/auart.htm - look at Cin. BITTIM and
HALFBT are only needed if you don't have a timer with fine granularity
- a few microseconds would be good.

For Baudot (or Gray or Murray code), it's 5 bits (and the first bit is
1-1/2 bit times or 2 bit times long - depending on whose Teletype
machine is transmitting - Teletype corporation made them both ways,
depending on the customer - so you might want to give the user the
choice of 1-1/2 or 2 stop bits). Grab the next *5* bits, assemble
them into a right-justified byte (the left 3 bits are 0) (stop bit
here too - same as for ASCII) - the bit banger will work here too -
look to see if you're in Figs or Ltrs and look it up in the
appropriate table. If it's all 5 bits (31), it's Ltrs, so set your
shift indicator to Ltrs. If it's Figs (27) set your shift indicator
to Figs. (Ltrs and Figs are transmitted characters.) Give the user
the choice of "Unshift on space". If it's chosen, and the character
is a space (4), convert to 32 (ASCII for space) and set the shift
indicator for Ltrs. If not, just convert to 32.

You can find the entire Baudot chart at
http://home.austin.rr.com/kinghome/signpage/baudot.html.

Oh - if you're in Ltrs shift and receive Ltrs, that's normal. Old TTY
operators would "diddle" the Ltrs key, to let you know that they were
thinking of what to say. Those of us who used real Teletype machines
back in prehistoric times still do that. And, when using paper tape,
punching Ltrs erased any error, so if someone is transmitting an old
tape, you could get a string of Ltrs..

Now, as far as what happens between the Line In jack and the program,
you're on your own - I've never done sound card programming.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WAVECOM Digital Data Decoders - Opinions? Pitfalls?	wa5dxp	Shortwave	0	February 11th 06 09:52 PM
NAVTEX Decoders Question ?	Robert11	Shortwave	1	September 15th 05 03:43 PM
Hoka decoders	Roy Haines with Dewey Foley	Shortwave	16	August 25th 05 03:18 PM

Menu

About Us