Is there a high end SW radio from China coming ????
 

Hiya...

Been a while since I posted here. I remember some months back there was a
thread here regarding the wish list for a new high end receiver that was
being planned. I think the thread was actually started by a Chinese
electronic engineer that was working on the project. At any rate, I forgot
what the story was. Is there a high end receiver on the way from China ???
If so, is it a portable or may be even a table top ???

Thanx in advance !!!

Michael

New Jersey
R75
Many portables
Several demented self constructed antennas
Two vintage tube radiois.
One cat.

Is there a high end SW radio from China coming ????
 

The Chinese make junk radios. The Japanese radios are the best. No such
thing as a Chinese high end radio now, or ever.
Michael wrote:
Hiya...

Been a while since I posted here. I remember some months back there was a
thread here regarding the wish list for a new high end receiver that was
being planned. I think the thread was actually started by a Chinese
electronic engineer that was working on the project. At any rate, I forgot
what the story was. Is there a high end receiver on the way from China ???
If so, is it a portable or may be even a table top ???

Thanx in advance !!!

Michael

New Jersey
R75
Many portables
Several demented self constructed antennas
Two vintage tube radiois.
One cat.

Is there a high end SW radio from China coming ????
 

Hiya Mike

- Check this one out;

Shirt pocket sized Kaito KA11

http://www.radiointel.com/Radpic/kaito/ka11.jpg

- Not real high end; but double reduction,

1,000 memories and

real real portable




Michael wrote:
Hiya...

Been a while since I posted here. I remember some months back there was a
thread here regarding the wish list for a new high end receiver that was
being planned. I think the thread was actually started by a Chinese
electronic engineer that was working on the project. At any rate, I forgot
what the story was. Is there a high end receiver on the way from China ???
If so, is it a portable or may be even a table top ???

Thanx in advance !!!

Michael

New Jersey
R75
Many portables
Several demented self constructed antennas
Two vintage tube radiois.
One cat.

Is there a high end SW radio from China coming ????
 

I suspect that China has certain kinds of radios manufactured in China
for certain purposes that are of resonably good quality.
cuhulin

Is there a high end SW radio from China coming ????
 

Douche Bag wrote:
The Chinese make junk radios. The Japanese radios are the best. No such
thing as a Chinese high end radio now, or ever.
Michael wrote:
Hiya...


From somebody with a nickname of Douche Bag I wouldn't expect an
intelligent answer anyway......

Check out this one http://www.eham.net/reviews/detail/6038
Build 30 years ago in China and kicks a$$ of latest Palstar R30CC (yes,
including the famed Collins filters). Have both receivers and use them
side-by-side. Wouldn't be surprized that today's Chinese radios are
not far behind Western receivers. Chinese electronics industry is very
well advanced (check out where your computer or laptop was build,
including the chips that go inside). Just this week, Chinese
researchers presented the most advanced "humanoid" robot capable of
understanding 1000 different voice commands (yes, in Chinese).

Is there a high end SW radio from China coming ????
 

Awwww, I buy most of my radios at thrift stores and junk shops and
fleamarkets.I am too lazy to get up (been a long time since I ''got
up'') and follow them yard sales around.
cuhulin

Is there a high end SW radio from China coming ????
 

Yes, and Douche Bag is a coward also for not using a real e-mail
address.......


"katekebo" wrote in message
ups.com...

Douche Bag wrote:
The Chinese make junk radios. The Japanese radios are the best. No such
thing as a Chinese high end radio now, or ever.
Michael wrote:
Hiya...


From somebody with a nickname of Douche Bag I wouldn't expect an
intelligent answer anyway......

Check out this one http://www.eham.net/reviews/detail/6038
Build 30 years ago in China and kicks a$$ of latest Palstar R30CC (yes,
including the famed Collins filters). Have both receivers and use them
side-by-side. Wouldn't be surprized that today's Chinese radios are
not far behind Western receivers. Chinese electronics industry is very
well advanced (check out where your computer or laptop was build,
including the chips that go inside). Just this week, Chinese
researchers presented the most advanced "humanoid" robot capable of
understanding 1000 different voice commands (yes, in Chinese).

Is there a high end SW radio from China coming ????
 

From anybody with a,,,,,,,
Nawwwwww,,,, I wont say that one either.
But,I dont like to pick on anybodys name.Although I have done so before
and for that,I Apologize.
cuhulin

Is there a high end SW radio from China coming ????
 

katekebo wrote:
Douche Bag wrote:
The Chinese make junk radios. The Japanese radios are the best. No such
thing as a Chinese high end radio now, or ever.
Michael wrote:
Hiya...


From somebody with a nickname of Douche Bag I wouldn't expect an
intelligent answer anyway......

Check out this one http://www.eham.net/reviews/detail/6038
Build 30 years ago in China and kicks a$$ of latest Palstar R30CC (yes,
including the famed Collins filters). Have both receivers and use them
side-by-side. Wouldn't be surprized that today's Chinese radios are
not far behind Western receivers. Chinese electronics industry is very
well advanced (check out where your computer or laptop was build,
including the chips that go inside). Just this week, Chinese
researchers presented the most advanced "humanoid" robot capable of
understanding 1000 different voice commands (yes, in Chinese).

I can imagine that the Chinese would not scrimp at all when it comes to
building military equipment. There's no reason to think they'd give
their troops in the field the same crappy receivers they sell to
consumers in the West.

Is there a high end SW radio from China coming ????
 

I think the one you're referring to is the Degen 1108. They had a
similar one, I think it was the Degen 1106. They had it on radiointel.
It had the modular MP3 player that goes into a 'slot'.

Details are still sketch on the 1108. I'm not sure if it'll even ever
come out, but Degend seems to be the major player in radio development.
With the exception of some of those DRM radios that are coming out..

Is there a high end SW radio from China coming ????
 

"Douche Bag" wrote in message
oups.com...
The Chinese make junk radios. The Japanese radios are the best. No such
thing as a Chinese high end radio now, or ever.
Michael wrote:
Hiya...

Remind me why I dont bother with this ng any more

Is there a high end SW radio from China coming ????
 

Is there a high end SW radio from China coming ????
 

Are there ANY portable radios currently being made in Japan?
I thought that the only SW radios still actually made there are the
JRC models at many kilodollars each, and perhaps the actual
manufacturing of those has been shifted offshore, too.

Re a coming Chinese-made radio: Could this have been the
Degen 1106, the design of which actually was sold and eventually
came on the market as the Eton E5?

Or are we talking about a tabletop set equivalent to a Watkins-Johnson
or high-end JRC or the big Ten-Tec?

Actually, I would think that the Chinese military might have a local
contractor making something like that for them, and there isn't any
real reason that such a radio couldn't be offered on the world market.
Any Chinese company certainly now has the incentive to try to expand
their market for any product that's not classified. I wonder if
anything
like that shows up at the Asian trade fairs for military goods,
aircraft,
etc.?

Will

Douche Bag wrote:
The Chinese make junk radios. The Japanese radios are the best. No such
thing as a Chinese high end radio now, or ever.
Michael wrote:
Hiya...

Been a while since I posted here. I remember some months back there was a
thread here regarding the wish list for a new high end receiver that was
being planned. I think the thread was actually started by a Chinese
electronic engineer that was working on the project. At any rate, I forgot
what the story was. Is there a high end receiver on the way from China ???
If so, is it a portable or may be even a table top ???

Thanx in advance !!!

Michael

Is there a high end SW radio from China coming ????
 

"Will" ) writes:
Are there ANY portable radios currently being made in Japan?
I thought that the only SW radios still actually made there are the
JRC models at many kilodollars each, and perhaps the actual
manufacturing of those has been shifted offshore, too.

Re a coming Chinese-made radio: Could this have been the
Degen 1106, the design of which actually was sold and eventually
came on the market as the Eton E5?

Or are we talking about a tabletop set equivalent to a Watkins-Johnson
or high-end JRC or the big Ten-Tec?

Because the original poster said something about a previous post here
asking about what features were desired, I'm thinking he just garbled
it.

At one point, Pete, KE9OA, did ask about features for a radio here,
but it was for an AM broadcast band receiver only. That was back in the
fall of 2003. The design did come about, but I can't recall the end point.
Obviously, it has been a while since that happened, and I don't recall
anything about it actually going into production. The company was not
one we'd know for shortwave receivers, may not have even been one most
would recognize.

That's the only time I can remember anyone asking here about features to
put in a radio. Well, it's come up plenty of times as a fantasy game,
but I don't anyone else asking in anticipation of designing a commercial
piece of equipment.

Michael

Is there a high end SW radio from China coming ????
 

"Michael Black" wrote in message
...
"Will" ) writes:
Are there ANY portable radios currently being made in Japan?
I thought that the only SW radios still actually made there are the
JRC models at many kilodollars each, and perhaps the actual
manufacturing of those has been shifted offshore, too.

Re a coming Chinese-made radio: Could this have been the
Degen 1106, the design of which actually was sold and eventually
came on the market as the Eton E5?

Or are we talking about a tabletop set equivalent to a Watkins-Johnson
or high-end JRC or the big Ten-Tec?

Because the original poster said something about a previous post here
asking about what features were desired, I'm thinking he just garbled
it.

At one point, Pete, KE9OA, did ask about features for a radio here,
but it was for an AM broadcast band receiver only. That was back in the
fall of 2003. The design did come about, but I can't recall the end
point.
Obviously, it has been a while since that happened, and I don't recall
anything about it actually going into production. The company was not
one we'd know for shortwave receivers, may not have even been one most
would recognize.

That's the only time I can remember anyone asking here about features to
put in a radio. Well, it's come up plenty of times as a fantasy game,
but I don't anyone else asking in anticipation of designing a commercial
piece of equipment.

Michael


Hello... I'm 100 % sure there was a thread here about a "wish list" for a
new Chinese sw receiver that was in the works. The thread was started by a
person that was involved in the design/production of the radio. From what I
recall, the radio was going to be along the lines of a Sat-800 as far as
performance goes. I still cant remember if it was a portable or a table
top. I also remember that the thread deteriorated into all sorts of
xenophobic commentary. No one remembers that ??? There were dozens of posts
to that thread.

Michael

Is there a high end SW radio from China coming ????
 

Oh, I remember quite clearly. It was a designer from Degen that was asking.





"Michael" wrote in message
...

"Michael Black" wrote in message
...
"Will" ) writes:
Are there ANY portable radios currently being made in Japan?
I thought that the only SW radios still actually made there are the
JRC models at many kilodollars each, and perhaps the actual
manufacturing of those has been shifted offshore, too.

Re a coming Chinese-made radio: Could this have been the
Degen 1106, the design of which actually was sold and eventually
came on the market as the Eton E5?

Or are we talking about a tabletop set equivalent to a Watkins-Johnson
or high-end JRC or the big Ten-Tec?

Because the original poster said something about a previous post here
asking about what features were desired, I'm thinking he just garbled
it.

At one point, Pete, KE9OA, did ask about features for a radio here,
but it was for an AM broadcast band receiver only. That was back in the
fall of 2003. The design did come about, but I can't recall the end
point.
Obviously, it has been a while since that happened, and I don't recall
anything about it actually going into production. The company was not
one we'd know for shortwave receivers, may not have even been one most
would recognize.

That's the only time I can remember anyone asking here about features to
put in a radio. Well, it's come up plenty of times as a fantasy game,
but I don't anyone else asking in anticipation of designing a commercial
piece of equipment.

Michael


Hello... I'm 100 % sure there was a thread here about a "wish list" for a
new Chinese sw receiver that was in the works. The thread was started by
a
person that was involved in the design/production of the radio. From what
I
recall, the radio was going to be along the lines of a Sat-800 as far as
performance goes. I still cant remember if it was a portable or a table
top. I also remember that the thread deteriorated into all sorts of
xenophobic commentary. No one remembers that ??? There were dozens of
posts
to that thread.

Michael

Is there a high end SW radio from China coming ????
 

Will wrote:
Are there ANY portable radios currently being made in Japan?
I thought that the only SW radios still actually made there are the
JRC models at many kilodollars each, and perhaps the actual
manufacturing of those has been shifted offshore, too.

Dear Will,

The Sony ICF-SW7600GR is made in Japan and to a very high construction
standard too, not even to mention its excellent performance for a small
portable shortwave receiver. It's an excellent value, too, especially
when on sale for under $130.

Re a coming Chinese-made radio: Could this have been the
Degen 1106, the design of which actually was sold and eventually
came on the market as the Eton E5?

Or are we talking about a tabletop set equivalent to a Watkins-Johnson
or high-end JRC or the big Ten-Tec?

The original thread was about a proposed Degen Model 1108. The writer
asked for people to comment on features desired for such a radio. I
believe the designers are considering a radio along the lines of the
Grundig Satellit 800 or Eton E1, but of much higher performance
quality, along the lines of a tabletop.

There is a Yahoo! group - http://groups.yahoo.com/group/de1108/
about this radio which you may want to join.

Actually, I would think that the Chinese military might have a local
contractor making something like that for them, and there isn't any
real reason that such a radio couldn't be offered on the world market.
Any Chinese company certainly now has the incentive to try to expand
their market for any product that's not classified. I wonder if
anything
like that shows up at the Asian trade fairs for military goods,
aircraft,
etc.?

Will

At least one Chinese-made radio is very good and well-made, at least in
my opinion and experience, and that is the dual-conversion Sony
ICF-SW35, the only Sony-brand shortwave receiver manufactured in China.
It's a bit short on features (most notably the lack of a keypad), but
offers very good performance, especially at its price of under $90, and
its construction quality and ruggedness is second to none. I own two
and both are kept in the glove compartments of my cars - winter and
summer - with the batteries removed. When I re-install the batteries,
the memories are still there and all I have to reset is the clock. The
radios are now over four years old and they always work perfectly.

Best,

Joe

Is there a high end SW radio from China coming ????
 

I remember that thread too.I think the guy was in China,,,,, Hong Kong?
cuhulin

Is there a high end SW radio from China coming ????
 

Just to add a bit to what I posted befo

We know that China makes SW broadcast transmitting equipment;
they've installed some in Cuba and there were a number of Chinese
technicians stationed there for SWBC support -- not sure if they're
still there or not. Anyway, one would think that a Chinese company
making SW transmitters might get involved in making high-end SW
receiving gear for monitoring, in addition to whatever the Chinese
military or intelligence organizations might want made for them.
Probably would have been more cost-effective, at least in the past,
than spending foreign currency to buy multi-kilobuck receivers from
overseas. They certainly have the capability to clone Watkins-Johnson
and other such receivers made for those markets.

If a $5-$10 K level receiver came on the market for $1K list, I wonder
what the possible sales figures would be?

73, Will