Hello All,

Picking up my SWL hobby wich I left in ~ 1992.

I have a Phillips D2999PLL and Sony AN-1 which I have kept from back
then. My living situation is far worse (for SWL that is) compared to
back then when living ina quiet suburb. Living in the city centre now
with a supermarket with huge fans on their roof for cooling the
freezers and such, and ofcourse all the equipment from our neighbours.

So I've been reading the forums, sites and newsgroups on my equipment
and found that generally the receiver is well received (*g*), and the
antenna is not! Back then though I've been able to receive quite a
bunch of QSL cards from stations I picked up in the tropical bands. Had
lots and lotsof night of fun!

But, to improve my antenna situation I've been looking around to see
for alternatives. Active antenna's are out of the question for me.
Frick, the quality ones seem to start at 200Euro. As a soon to be daddy
and other expenses coming up I can't afford those...

I've little room for a reasonable 'random wire' either. After some
looking around I decided to give the EMF antenna a try from RF-Systems
in the Netherlands (where I come from as well, accidentally).
After a few days of trying different configurations (indoors, out on
the balcony, horizontal, vertical, north-south, west-east and all
inbetween, 30 degree sloped, earthing to the earthwire in the powerbox
of the appartment, etc) and comparing it to my Sony AN-1, I can savely
say, at best the EMF antenna produces equally to the Sony An-1, but has
never exceeded it. It seems to pickup far more noise and interference
then the AN-1 does.

So the EMF is up for grabs for anyone here who makes a good offer for
it!

I also have to add, I did quite some browsing and reading on the EMF
before I ordered it, and the general tendency was it is an OK antenna.

I guess, in my situation the AN-1 isnt such a bad antenna after all, or
the EMF is for my situation a really bad antenna!

This week I am going to try and build a magnetic loop. At first I saw
many daunting schematics which are too technical for me with my left
hands, but I found this page (http://www.kr1st.com/swlloop.htm) with a
*very* simple version that according to the writer is so simple as it
is for receiving only. Apparently, the transmitting ones need to be far
more technical. Does anyone has any tips regarding building any of
these? My particular interest is the 60meter band.

And, anyone any comments on my EMF/AN-1 comparison? I think I pretty
much tried all configurations, and in reality there isnt much to do
with the EMF, its all prebuild. But I'm open for suggestions!

Jeroen wrote:
Hello All,

Picking up my SWL hobby wich I left in ~ 1992.

I have a Phillips D2999PLL and Sony AN-1

And, anyone any comments on my EMF/AN-1 comparison? I think I pretty
much tried all configurations, and in reality there isnt much to do
with the EMF, its all prebuild. But I'm open for suggestions!
.................................................. .................................................. ............................
I used an AN-1 in a concrete apartment for a year and it worked well
after I had made a change to it. Unmodified, it was quiet, didn't hurt
the signals but it didn't seem to have much gain. I added a thin
hustler 2 meter 5/8 whip to the end of the AN-1 whip (about 4 feet as I
recall) and that improved it consiserably. I think that Sony was
worried about generating spurious in high-signal areas like Europe and
used very a conservative amplifier. Adding a length to the whip in
weak-signal areas had no bad effects.

In article . com,
"ve3..." wrote:

Jeroen wrote:
Hello All,

Picking up my SWL hobby wich I left in ~ 1992.

I have a Phillips D2999PLL and Sony AN-1

And, anyone any comments on my EMF/AN-1 comparison? I think I pretty
much tried all configurations, and in reality there isnt much to do
with the EMF, its all prebuild. But I'm open for suggestions!
.................................................. ............................
.................................................
I used an AN-1 in a concrete apartment for a year and it worked well
after I had made a change to it. Unmodified, it was quiet, didn't hurt
the signals but it didn't seem to have much gain. I added a thin
hustler 2 meter 5/8 whip to the end of the AN-1 whip (about 4 feet as I
recall) and that improved it consiserably. I think that Sony was
worried about generating spurious in high-signal areas like Europe and
used very a conservative amplifier. Adding a length to the whip in
weak-signal areas had no bad effects.

The advantage of this small active antenna is you can put it in the
quietest location of you house. Go around with a portable radio to find
a quite spot and mount the AN-1 there.

--
Telamon
Ventura, California

Hello All,

Thanks for your replies. Here some reactions from my side:

I used an AN-1 in a concrete apartment for a year and it worked well
after I had made a change to it. Unmodified, it was quiet, didn't hurt
the signals but it didn't seem to have much gain. I added a thin
hustler 2 meter 5/8 whip to the end of the AN-1 whip (about 4 feet as I
recall) and that improved it consiserably. I think that Sony was
worried about generating spurious in high-signal areas like Europe and
used very a conservative amplifier. Adding a length to the whip in
weak-signal areas had no bad effects.

I did this as well, I do live in Europe (Holland) and it increased the
noise heavily, making it not really usefull for me.

Small active loop antennas are pricey but are most likely the best in
town choice.

Unfortunally, no money for that :\

To get an idea how this type of antenna will work in your location you
could build a passive loop at small cost using just coax cable.

This is what I am going to do. Aftre some digging around I will go for
copper tubing however, as on one site I found that on lower frequencies
thicker copper will do better then the thinner one advised in the
article I gave the URL for.

I'm looking forward to building somehting of my own though! And I'll
probably experiment afterwards to improve the results. Can't wait to
see wether it will outperform my AN-1 antenna.... The costs are, like
you said, minimal.

I'll post back when I have done some testing on my to-be magnetic loop

In article . com,
"Jeroen" wrote:

Hello All,

Thanks for your replies. Here some reactions from my side:

I used an AN-1 in a concrete apartment for a year and it worked well
after I had made a change to it. Unmodified, it was quiet, didn't hurt
the signals but it didn't seem to have much gain. I added a thin
hustler 2 meter 5/8 whip to the end of the AN-1 whip (about 4 feet as I
recall) and that improved it consiserably. I think that Sony was
worried about generating spurious in high-signal areas like Europe and
used very a conservative amplifier. Adding a length to the whip in
weak-signal areas had no bad effects.

I did this as well, I do live in Europe (Holland) and it increased the
noise heavily, making it not really usefull for me.

Small active loop antennas are pricey but are most likely the best in
town choice.

Unfortunally, no money for that :\

To get an idea how this type of antenna will work in your location you
could build a passive loop at small cost using just coax cable.

This is what I am going to do. Aftre some digging around I will go for
copper tubing however, as on one site I found that on lower frequencies
thicker copper will do better then the thinner one advised in the
article I gave the URL for.

I'm looking forward to building somehting of my own though! And I'll
probably experiment afterwards to improve the results. Can't wait to
see wether it will outperform my AN-1 antenna.... The costs are, like
you said, minimal.

I'll post back when I have done some testing on my to-be magnetic loop


You don't have to use copper tubing. You can build the antenna using
just the coax.

If you build a 40 foot loop you would build it like this:
1. Cut a piece of coax 40 feet long.
2. Cut the shield only at 20 feet separate the shield about an inch.
3. Bring the ends of the loop together connecting the shields and center
conductor on one end.
4. Connect the shield of the lead-in coax shield to the shields of the
loop and the remaining free center conductor of the loop to the center
conductor of the lead-in coax.

The loop will be somewhat unbalanced but should work pretty good. You
can improve the balance of the loop by using a BALUN made of enamel
coated wire and a ferrite toroid core. If you use the BALUN you would
have both ends of the loop center conductors connected to a bifilar
winding on the core of a few turns where the other end of the winding is
connected to the lead-in center conductor and common ground made of both
end of the loop shields and the lead-in shield. All this should only
cost under $50 dollars.

--
Telamon
Ventura, California

In article om,
"Jeroen" wrote:

Hello All,

Picking up my SWL hobby wich I left in ~ 1992.

I have a Phillips D2999PLL and Sony AN-1 which I have kept from back
then. My living situation is far worse (for SWL that is) compared to
back then when living ina quiet suburb. Living in the city centre now
with a supermarket with huge fans on their roof for cooling the
freezers and such, and ofcourse all the equipment from our neighbours.

So I've been reading the forums, sites and newsgroups on my equipment
and found that generally the receiver is well received (*g*), and the
antenna is not! Back then though I've been able to receive quite a
bunch of QSL cards from stations I picked up in the tropical bands. Had
lots and lotsof night of fun!

But, to improve my antenna situation I've been looking around to see
for alternatives. Active antenna's are out of the question for me.
Frick, the quality ones seem to start at 200Euro. As a soon to be daddy
and other expenses coming up I can't afford those...

I've little room for a reasonable 'random wire' either. After some
looking around I decided to give the EMF antenna a try from RF-Systems
in the Netherlands (where I come from as well, accidentally).
After a few days of trying different configurations (indoors, out on
the balcony, horizontal, vertical, north-south, west-east and all
inbetween, 30 degree sloped, earthing to the earthwire in the powerbox
of the appartment, etc) and comparing it to my Sony AN-1, I can savely
say, at best the EMF antenna produces equally to the Sony An-1, but has
never exceeded it. It seems to pickup far more noise and interference
then the AN-1 does.

So the EMF is up for grabs for anyone here who makes a good offer for
it!

I also have to add, I did quite some browsing and reading on the EMF
before I ordered it, and the general tendency was it is an OK antenna.

I guess, in my situation the AN-1 isnt such a bad antenna after all, or
the EMF is for my situation a really bad antenna!

This week I am going to try and build a magnetic loop. At first I saw
many daunting schematics which are too technical for me with my left
hands, but I found this page (http://www.kr1st.com/swlloop.htm) with a
*very* simple version that according to the writer is so simple as it
is for receiving only. Apparently, the transmitting ones need to be far
more technical. Does anyone has any tips regarding building any of
these? My particular interest is the 60meter band.

And, anyone any comments on my EMF/AN-1 comparison? I think I pretty
much tried all configurations, and in reality there isnt much to do
with the EMF, its all prebuild. But I'm open for suggestions!

Small active loop antennas are pricey but are most likely the best in
town choice.

To get an idea how this type of antenna will work in your location you
could build a passive loop at small cost using just coax cable.

--
Telamon
Ventura, California

Telamon wrote:
In article om,
"Jeroen" wrote:

Hello All,

Picking up my SWL hobby wich I left in ~ 1992.

I have a Phillips D2999PLL and Sony AN-1 which I have kept from back
then. My living situation is far worse (for SWL that is) compared to
back then when living ina quiet suburb. Living in the city centre now
with a supermarket with huge fans on their roof for cooling the
freezers and such, and ofcourse all the equipment from our neighbours.

So I've been reading the forums, sites and newsgroups on my equipment
and found that generally the receiver is well received (*g*), and the
antenna is not! Back then though I've been able to receive quite a
bunch of QSL cards from stations I picked up in the tropical bands. Had
lots and lotsof night of fun!

But, to improve my antenna situation I've been looking around to see
for alternatives. Active antenna's are out of the question for me.
Frick, the quality ones seem to start at 200Euro. As a soon to be daddy
and other expenses coming up I can't afford those...

I've little room for a reasonable 'random wire' either. After some
looking around I decided to give the EMF antenna a try from RF-Systems
in the Netherlands (where I come from as well, accidentally).
After a few days of trying different configurations (indoors, out on
the balcony, horizontal, vertical, north-south, west-east and all
inbetween, 30 degree sloped, earthing to the earthwire in the powerbox
of the appartment, etc) and comparing it to my Sony AN-1, I can savely
say, at best the EMF antenna produces equally to the Sony An-1, but has
never exceeded it. It seems to pickup far more noise and interference
then the AN-1 does.

So the EMF is up for grabs for anyone here who makes a good offer for
it!

I also have to add, I did quite some browsing and reading on the EMF
before I ordered it, and the general tendency was it is an OK antenna.

I guess, in my situation the AN-1 isnt such a bad antenna after all, or
the EMF is for my situation a really bad antenna!

This week I am going to try and build a magnetic loop. At first I saw
many daunting schematics which are too technical for me with my left
hands, but I found this page (http://www.kr1st.com/swlloop.htm) with a
*very* simple version that according to the writer is so simple as it
is for receiving only. Apparently, the transmitting ones need to be far
more technical. Does anyone has any tips regarding building any of
these? My particular interest is the 60meter band.

And, anyone any comments on my EMF/AN-1 comparison? I think I pretty
much tried all configurations, and in reality there isnt much to do
with the EMF, its all prebuild. But I'm open for suggestions!
-
- Small active loop antennas are pricey but
- are most likely the best in town choice.
-
- To get an idea how this type of antenna will work in your location
you
- could build a passive loop at small cost using just coax cable.
-
- --
- Telamon
- Ventura, California


Telamon - Yes I Agreed - The single-turn Coax Cable {Shielded}
Loop Antenna for basic Shortwave Radio Listening (SWL) is one
of the better choices for ease of construction and utility.
http://www.iri.tudelft.nl/~geurink/i..._schematic.jpg

READ ABOUT - THe Coax Cable {Shielded} Loop Antenna
[GreerTech]
http://groups.google.com/group/rec.r...7b1501f08ffebe
http://groups.google.com/group/rec.r...03fed7472a9e53

http://groups.google.com/group/rec.r...8005ce8c7f5c9c
http://groups.google.com/group/rec.r...f9f216217d3420

http://groups.google.com/group/rec.r...6e2b951e35abd9
http://groups.google.com/group/rec.r...52a8e37790a367
http://groups.google.com/group/rec.r...8005ce8c7f5c9c
http://groups.google.com/group/rec.r...dc49a6c156fa2b


"Low Noise Receive-Only Coax Cable Loop Antennas for the
160 Meter to 10 Meter Shortwave {High Frequency} Bands"
http://www.greertech.com/hfloop/mymagloop.html
The so called GREER TECH "Coax Loop" Antenna.

The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas
http://groups.google.com/group/rec.r...a0aadd03af7bc7

Hula Hoop Loop Antenna and more . . .
http://groups.google.com/group/rec.r...fc1c535a7e8169
The basic design of the "GreerTech" Coax Cable [Shielded] Loop
Antenna is good and very practical.
GREERTECH = http://www.greertech.com/hfloop/mymagloop.html
LOOP= http://www.greertech.com/hfloop/mymagloop.html
http://groups.yahoo.com/group/Shortw...a/message/1625
http://groups.yahoo.com/group/Shortw...a/message/1730
http://groups.yahoo.com/group/Shortw...a/message/1539
http://groups.yahoo.com/group/Shortw...a/message/1008

FWIW - 'other' "Shielded-Magnetic" Loop Receiving Antenna
WebPages to Check-Out :
http://www.io.com/~n5fc/loop_ant.html
http://user.netonecom.net/~swordman/Radio/shloopant.htm
http://www.qsl.net/mnqrp/Loop/Mag_Loops.htm
http://beradio.com/news/radio_shield..._am_antenna_2/
http://www.iri.tudelft.nl/~geurink/magnloop.htm
http://www.hard-core-dx.com/nordicdx.../coaxloop.html

ABOUT - Loop Antennas:
http://www.frontiernet.net/~jadale/Loop.htm
- What is a Loop and Why Use It
- Construction Principles
- What Can I Use a Loop For
- Loops Another Look
- Pictures of Home Built PVC loops
- Loop Links


keeping you in the loop when it comes to
shortwave antennas cause . . . iane ~ RHF
.
Shortwave Listener Antennas = http://tinyurl.com/ogvcf
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
SWL Antenna Group = http://tinyurl.com/ogvcf
.
The Shortwave Listener's Blessing :
SWL BLESSING = http://tinyurl.com/s2bjm
May You Never Tire of Listening to the Radio and Always
have Strong Signals and Noise Free Reception ~ RHF {ibid}
http://groups.yahoo.com/group/Shortw...a/message/9233
.
Tous Sont Bienvenus ! - - - Groupe par Radio
d'auditeur d'onde courte pour des Antennes de SWL
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
Alle Sind Willkommen ! - - - Shortwave Radiozuhörer
Gruppe für SWL Antennen
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
Tutti Sono Benvenuti ! - - - Gruppo Radiofonico
dell'ascoltatore di onda corta per le Antenne di SWL
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
Todos São Bem-vindos ! - - - Grupo de Rádio
do ouvinte do Shortwave para Antenas de SWL
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
Ð’Ñ�е Ð*адушны ! - - - Группа оператора
на приеме коротковолнового диапазона
Radio дл� Aнтенн SWL
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
¡Todos Son Agradables! - - - Grupo de Radio del oyente
de la onda corta para las Antenas de SWL
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
= = = = = = = = = = Translation = = = = = = = = = =
All are Welcome - - - To Join the Shortwave Listeners
(SWL) Antenna Group on YAHOO !
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
.
|
|
|
/ \
-------!-------

Jeroen wrote:
Hello All,

Picking up my SWL hobby wich I left in ~ 1992.

I have a Phillips D2999PLL and Sony AN-1 which I have kept from back
then. My living situation is far worse (for SWL that is) compared to
back then when living ina quiet suburb. Living in the city centre now
with a supermarket with huge fans on their roof for cooling the
freezers and such, and ofcourse all the equipment from our neighbours.

So I've been reading the forums, sites and newsgroups on my equipment
and found that generally the receiver is well received (*g*), and the
antenna is not! Back then though I've been able to receive quite a
bunch of QSL cards from stations I picked up in the tropical bands. Had
lots and lotsof night of fun!

But, to improve my antenna situation I've been looking around to see
for alternatives. Active antenna's are out of the question for me.
Frick, the quality ones seem to start at 200Euro. As a soon to be daddy
and other expenses coming up I can't afford those...

I've little room for a reasonable 'random wire' either. After some
looking around I decided to give the EMF antenna a try from RF-Systems
in the Netherlands (where I come from as well, accidentally).
After a few days of trying different configurations (indoors, out on
the balcony, horizontal, vertical, north-south, west-east and all
inbetween, 30 degree sloped, earthing to the earthwire in the powerbox
of the appartment, etc) and comparing it to my Sony AN-1, I can savely
say, at best the EMF antenna produces equally to the Sony An-1, but has
never exceeded it. It seems to pickup far more noise and interference
then the AN-1 does.

So the EMF is up for grabs for anyone here who makes a good offer for
it!

I also have to add, I did quite some browsing and reading on the EMF
before I ordered it, and the general tendency was it is an OK antenna.

I guess, in my situation the AN-1 isnt such a bad antenna after all, or
the EMF is for my situation a really bad antenna!

This week I am going to try and build a magnetic loop. At first I saw
many daunting schematics which are too technical for me with my left
hands, but I found this page (http://www.kr1st.com/swlloop.htm) with a
*very* simple version that according to the writer is so simple as it
is for receiving only. Apparently, the transmitting ones need to be far
more technical. Does anyone has any tips regarding building any of
these? My particular interest is the 60meter band.

And, anyone any comments on my EMF/AN-1 comparison? I think I pretty
much tried all configurations, and in reality there isnt much to do
with the EMF, its all prebuild. But I'm open for suggestions!

Jeroen,

The RF Systems "EMF" Antenna is relatively short at 16 Feet
and is a magnetically coupled Antenna. The signal levels are
thus relatively small compared to a much longer 50-80 Foot
Random Wire Antenna. So -Yes- in this instance you may find
that the Sony AN-1 Active Antenna does as well or better than
the "EMF".

Don't forget that the Sony AN-1 Active Antenna :
* Should be Mounted at least 3-5 Feet above your Roof
-or- at least 15-20 Feet away from your House/Building.
* Can be Mounted inside the Attic.
* Can be Mounted Horizontally and Rotated to Null-Out
the main source of your local Noise to some degree.
{every little bit helps }

Alternative - Instead of using the Sony AN-1 Active Antenna's
Short Vertical Whip Antenna Element : Use a One Metre
Diameter Horizontal Loop Antenna Element with one-end
of the Loop connected directly to the Sony's Head Unit and
the other-end of the Loop connected via a 300, 450, 600 or
1K Ohm Resister to the Sony's Head Unit. Try the different
Resisters to determine which gives the best Signal Levels
and overall frequency coverage.
Note - Sometimes the sort of Terminated Horizontal Loop
Antenna Element will provide lower noise levels and better
Radio reception then the simple Vertical Whip Antenna
Element. Usually this type of Terminated Horizontal Loop
Antenna Element is installed in an Attic Area.

iane ~ RHF

RHF wrote:

Alternative - Instead of using the Sony AN-1 Active Antenna's
Short Vertical Whip Antenna Element : Use a One Metre
Diameter Horizontal Loop Antenna Element with one-end
of the Loop connected directly to the Sony's Head Unit and
the other-end of the Loop connected via a 300, 450, 600 or
1K Ohm Resister to the Sony's Head Unit. Try the different
Resisters to determine which gives the best Signal Levels
and overall frequency coverage.

This could be an interetsing experiment I've already bought
coppertubing and so to make the loop as described on that previous
page, so if that turns to be a failed experiment, I might use it for
this

Just to clarify (I blame my non-native knowledge of English):

So one end of the loop to the element where the whip is normally
attached to, and the other to the unit with the switches? And, do I
connect the loop to the 'inside' connector of the box? Nothing needs to
be connected to the shielding?

I'd love to see a schematic if possible...

Jeroen wrote:
RHF wrote:

Alternative - Instead of using the Sony AN-1 Active Antenna's
Short Vertical Whip Antenna Element : Use a One Metre
Diameter Horizontal Loop Antenna Element with one-end
of the Loop connected directly to the Sony's Head Unit and
the other-end of the Loop connected via a 300, 450, 600 or
1K Ohm Resister to the Sony's Head Unit. Try the different
Resisters to determine which gives the best Signal Levels
and overall frequency coverage.

This could be an interetsing experiment I've already bought
coppertubing and so to make the loop as described on that previous
page, so if that turns to be a failed experiment, I might use it for
this

Just to clarify (I blame my non-native knowledge of English):

So one end of the loop to the element where the whip is normally
attached to, and the other to the unit with the switches? And, do I
connect the loop to the 'inside' connector of the box? Nothing needs to
be connected to the shielding?

I'd love to see a schematic if possible...

Jeroen,

Where the Whip Antenna Mast screws-on-to the top of
the Mast-Screw of the Sony AN-1 Active Antenna's Head Unit.
1 - Attach one-end of the Loop. (Use a Nut and Washer)
2 - Attach the other-end of the Loop to the Resister.
3 - Attach the free-end of the Resister to the Mast-Screw.

Just a plain simple Wire Horizontal Loop Element.
* You could use Stranded Wire or Litz Wire and Copper Tubing
or even the Outer-Shield of a Coax Cable would be OK too.
* The shape of the Loop could be Round, Square,
Triangle, Diamond, Octagon, etc.
* One Meter Diameter or per Side
* Length of Wire in the Loop about 10-12 Feet.

iane ~ RHF