Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
I've used an LF Engineering L-400B active whip in the past and it would
pretty much out perform longwires less than about 1000 feet. IT's only problem was intemod and overloading issues if MW stations were nearby. Mine actually wore out due the intense UV from the S. CA and AZ sun. I still have the electronic guts and should probably rework it for use again. I do have the PAR Inc. high and low pass filters and they work great on 50 ohm lines to eliminate intemod after a passive tuner. Despite the local MW stations I don't have any problems at night and I can force the situation most of the time during the day as long as there are no amps in the signal chain. Frank Tucson I have always had major problems with antennas longer then 100 to 150'. The strong out of band MW signals even cause a R390 front end to fold. Have you considered a low pass fitler to reject everything above ~500KKHz before your tuner? And as Burhans pointed out a "good" active antenna can often match a long wire. Will is having much better succes with his active antennas then the ~100' long wire. One winter, 1977-78 we had enough snow to last a lifetime. After 3 weeks with 3' of snow on the ground I gave up trying to erret a new antenna, I had just gotten married and had NO antenna. So I laid about 100' of #18 and it worked fairly welll. Let me do some more thinking. Terry Terry |