| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Hi Folks:
For about a wek or so, I have been hearing a strong pulsing interference on top of WWV at 10mHz. It's rythmic most of the time, two pulses/second maybe, and then there is a burst of garbage pulses that go on for 30 seconds or so. None of it sounds timed by anything with a sync. It sounds like someone doing it or something flashing over or arcing. It sounds like the individual pulses are pretty short, but long enough to hear that the frequency does shift a little. Is anyone else hearing this? Maybe it's local to me.. Harry |
|
#2
|
|||
|
|||
|
"HarryHydro" wrote in message oups.com... Hi Folks: For about a wek or so, I have been hearing a strong pulsing interference on top of WWV at 10mHz. It's rythmic most of the time, two pulses/second maybe, and then there is a burst of garbage pulses that go on for 30 seconds or so. None of it sounds timed by anything with a sync. It sounds like someone doing it or something flashing over or arcing. It sounds like the individual pulses are pretty short, but long enough to hear that the frequency does shift a little. Is anyone else hearing this? Maybe it's local to me.. Harry No interference in my area... Knoxville, TN USA |
|
#3
|
|||
|
|||
|
HarryHydro wrote: Hi Folks: For about a wek or so, I have been hearing a strong pulsing interference on top of WWV at 10mHz. It's rythmic most of the time, two pulses/second maybe, and then there is a burst of garbage pulses that go on for 30 seconds or so. None of it sounds timed by anything with a sync. It sounds like someone doing it or something flashing over or arcing. It sounds like the individual pulses are pretty short, but long enough to hear that the frequency does shift a little. Is anyone else hearing this? Maybe it's local to me.. Harry Perhaps you are charging your electric razor. All sorts of things make noise on shortwave. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: HP/AGILENT 432A PowerMeter (RF/Microwave), SENSOR INCLUDED, 10MHz - 40GHz or up dep. on sesnor. WORKING PERFECT | Antenna | |||
| Clicking from TV | Shortwave | |||
| add on 10mhz conversion for Paccomm Tiny 2 TNC | Swap | |||
| Readily available 10MHz divide by 96 10MHz down counter | Homebrew | |||
| Readily available 10MHz divide by 96 10MHz down counter | Homebrew | |||