RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   Keypad Repair (https://www.radiobanter.com/shortwave/111489-re-keypad-repair.html)

[email protected] December 13th 06 06:51 PM

Keypad Repair
 
Go to an auto parts store.Buy one of those repair kit thingys for
repairing the heater wires in windshields and rear windows of autos.
cuhulin


JoeSpareBedroom December 13th 06 07:04 PM

Keypad Repair
 
wrote in message
...
Go to an auto parts store.Buy one of those repair kit thingys for
repairing the heater wires in windshields and rear windows of autos.
cuhulin


Interesting idea. I haven't inspected the circuit board for cracks yet, but
I'll keep this in mind.



Panzer240 December 14th 06 12:14 AM

Keypad Repair
 
"JoeSpareBedroom" wrote in
:

wrote in message
...
Go to an auto parts store.Buy one of those repair kit thingys for
repairing the heater wires in windshields and rear windows of autos.
cuhulin


Interesting idea. I haven't inspected the circuit board for cracks yet,
but I'll keep this in mind.




Yes, this works but it is not a permanent solution, the material in the kit
does not bond well to the plastic and will eventually flake off bringing back
the original problem. BTW you paint this stuff on the plastic mat. The bumps
in the switch pad have a conductive coating on them which shorts the pads on
the cct board. You can also test the digit pads by using a screw driver balde
to gently short each pad. This would be after removing the cct board from the
housing. ;)

--
Panzer


JoeSpareBedroom December 14th 06 05:42 AM

Keypad Repair
 
"Panzer240" wrote in message
...
"JoeSpareBedroom" wrote in
:

wrote in message
...
Go to an auto parts store.Buy one of those repair kit thingys for
repairing the heater wires in windshields and rear windows of autos.
cuhulin


Interesting idea. I haven't inspected the circuit board for cracks yet,
but I'll keep this in mind.




Yes, this works but it is not a permanent solution, the material in the
kit
does not bond well to the plastic and will eventually flake off bringing
back
the original problem. BTW you paint this stuff on the plastic mat. The
bumps
in the switch pad have a conductive coating on them which shorts the pads
on
the cct board. You can also test the digit pads by using a screw driver
balde
to gently short each pad. This would be after removing the cct board from
the
housing. ;)

--
Panzer


Conductive coating....that's interesting. Seriously??? When I disassembled
the whole piece of crap, I wondered how the contact was being made.



[email protected] December 14th 06 08:07 AM

Keypad Repair
 
Now,if only I can get that thirty four year old divorced nasty talkin
woman in Petal,Mississippi to straighten up and fly right.
cuhulin



All times are GMT +1. The time now is 04:32 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com