Home |
Search |
Today's Posts |
#10
|
|||
|
|||
Yaesu FRG-7700 receives AM, not SW
On Feb 5, 12:13 pm, saki wrote:
"labtech1" wrote : Clean ALL your switches, and pots, mode, band, squelch, etc I have one of these and that seems to be a common problem corrosion on the controls ( or dirt, smoke, etc ) My Mode switch still requires a couple clicks in both directions to work right, probably from wear. Good advice. I've cleaned some but not all. Certainly won't hurt, in any case, even if the switch appears to be working. Thanks! ---- SAKI, Caution - Keep the Contact Cleaner "OFF" the Face Plate of the Receiver - Sometimes Sh*t Happens to the Markings when the Liquid {Solvent} gets on them. ~ RHF |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Announcing the 'new' Yaesu FRG-7700 Receiver Users eGroup on YAHOO ! | Shortwave | |||
FS: Icom, Yaesu, Alinco Manuals | Swap | |||
FS: Yaesu FT-897 SERVICE MANUAL | Swap | |||
FS: Icom, Yaesu Service Manuals Etc... | Swap | |||
FS: Icom, Yaesu Service Manuals | Swap |