Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
On Apr 8, 3:13 pm, "Ron Baker, Pluralitas!"
wrote: "Steve" wrote in message oups.com... On Apr 8, 12:15 pm, "Ron Baker, Pluralitas!" snip Cool. I've added the frequencies to my list. I've installed PC-ALE but it hasn't demodulated anything. Normally it says "SCANNING" and then when I hear a signal it typically says "SYNCING" or something like that but it has never printed a demodulated message. Do you know what the settings are to make it demodulate signals? -- rb- Hide quoted text - - Show quoted text - I'll have to check. If you look under configuration / options, you're have to identify the receiver type. Then you're asked which features you want to enable, and you should be able to pick and choose liberally here. Then there are some parameters. The values I'm using are as follows: 60 - Sounding Period 4 - Resound Period 3 - DCD Threshold 1 - Call Attempts 360 - TWA 30 - PTTD ms 25 - Sync Votes 25 - Frame Votes 0 - SCSC 18 - LQA Timeout 1 - Sync Errors 3 - Frame Errors 30 - Listen Time 50 - TX Audio Level 50 - RX Audio Level 1 - Radio Comm Port I don't know what all of these values represent, but these are the ones I use and everything seems to work okay. Those seem to all be the defaults. (Except I show 180 LQA Timeout, and the 0 is half cut off.) I also have lots of other options on that window. Do you have something like "Current Group" "_A _B _C....." and "Enable/Disable" "_Sounding _Polling _LQA _Allcalls _Anycalls....."? Also, it doesn't have my receiver type, but I don't think that should matter much, especially if I am not transmitting. -- rb- Hide quoted text - - Show quoted text - I doubt that the "Current Group" area is the problem. Any frequency you plug in is going to be placed in some group or other, and when the receiver is scanning it will scan all of the groups. I have the following "enabled": Allcalls Anycalls Display Sounds Listen Calls Freq display Voice detect These may have been defaults...I can't recall now. I'm surprised that there's no place where it says "Radio Type". On mine, this appears in the upper right hand corner of the configuration/ options screen. When you click on it, there's a drop down menu that includes a bunch of receivers. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
The Giddy Joys of Tourette's | Policy |