Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
Bob wrote:
Hello, I am new to SW and have recently purchased a ka1103 radio. It seems to work very well, but I have trouble with SSB. I live in NY and I don't seem to be able to pick up SSB. I am trying some of the The SSB USB (AFRTS) frequencies listed in the SW schedule from a magazine. I tune to the frequency, switch to SSB and then try to fine tune into a broadcast. I just can't seem to pick anything up. Could it be the radio or isn't there a strong enough signal? How can I determoine the reason? Thanks AFRTS broadcasts dont use a whole lot of power as they are for smaller area's instead of whole continents for example. Try the 80meter amateur bands at evenings/nighttime in LSB mode. There should be a few HAM's operating in NY for you to 'catch'. There are also VOLMET stations transmitting in USB. I'm located in Europe so I dont know any good frequenties for you off-hand. I have a few in the UK I always use to listen for conditions or antenne testing. Google is your friend here ![]() HTH, -- JeroenK |