RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   Moon Bounce - 20th Jan 2008 (https://www.radiobanter.com/shortwave/129605-moon-bounce-20th-jan-2008-a.html)

Rfburns January 20th 08 08:32 AM

Moon Bounce - 20th Jan 2008
 
On Jan 20, 3:18 am, Rfburns wrote:
On Jan 20, 3:14 am, Rfburns wrote:



On Jan 20, 3:11 am, Rfburns wrote:


On Jan 20, 3:07 am, Rfburns wrote:


On Jan 20, 2:56 am, AussieDrifter
wrote:


Rfburns,


if possible could you post a sample of what you're hearing :)


Cheers
Mark


------------------------------------------------------------------


Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/


Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening


Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:


G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo :(
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.


Bummer.


I will listen for the next feed.


Terry
Terry


I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw


--


I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.


The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.


jw


The 7 MHz signal is louder than the previous 6 MHz signal hear in West
Virginia. I also hear some goof balls transmitting CW near the
frequency


jw


At times the reflected signal is almost as loud as the up
transmission.


jw


At 3:15 AM EST the signal is getting louder. Pretty cool stuff.

jw


That's the end it just went off exactly at 0830z. No more moon
signals

jw

AussieDrifter January 20th 08 08:59 AM

Moon Bounce - 20th Jan 2008
 
Rfburns wrote:
On Jan 20, 3:14 am, Rfburns wrote:
On Jan 20, 3:11 am, Rfburns wrote:



On Jan 20, 3:07 am, Rfburns wrote:
On Jan 20, 2:56 am, AussieDrifter
wrote:
Rfburns,
if possible could you post a sample of what you're hearing :)
Cheers
Mark
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:
G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo :(
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.
Bummer.
I will listen for the next feed.
Terry
Terry
I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw
--
I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.
The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.
jw
The 7 MHz signal is louder than the previous 6 MHz signal hear in West
Virginia. I also hear some goof balls transmitting CW near the
frequency
jw

At times the reflected signal is almost as loud as the up
transmission.

jw


At 3:15 AM EST the signal is getting louder. Pretty cool stuff.

jw


RFBurns,

Lucky little bugger :)

Mark
------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website: http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

AussieDrifter January 20th 08 09:00 AM

Moon Bounce - 20th Jan 2008
 
Rfburns wrote:
On Jan 20, 3:18 am, Rfburns wrote:
On Jan 20, 3:14 am, Rfburns wrote:



On Jan 20, 3:11 am, Rfburns wrote:
On Jan 20, 3:07 am, Rfburns wrote:
On Jan 20, 2:56 am, AussieDrifter
wrote:
Rfburns,
if possible could you post a sample of what you're hearing :)
Cheers
Mark
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:
G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo :(
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.
Bummer.
I will listen for the next feed.
Terry
Terry
I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw
--
I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.
The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.
jw
The 7 MHz signal is louder than the previous 6 MHz signal hear in West
Virginia. I also hear some goof balls transmitting CW near the
frequency
jw
At times the reflected signal is almost as loud as the up
transmission.
jw

At 3:15 AM EST the signal is getting louder. Pretty cool stuff.

jw


That's the end it just went off exactly at 0830z. No more moon
signals

jw




So,

Whats the next project to get the world wide radio community glued to
the radio at the same time ?

This was fun :)

Cheers
Mark

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website: http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

[email protected] January 20th 08 09:02 AM

Moon Bounce - 20th Jan 2008
 
On Jan 19, 10:56 pm, AussieDrifter
wrote:
G'day Guys,

I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo :(

I have two recordings:

1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:

http://www.mediafire.com/?2v11ey4l1xd

2. is just an mp3 recording of similar period.

http://www.mediafire.com/?byt1jtm91uz

--
------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening


I recorded them both. No reflections heard in the SF Bay area. Well,
I'm glad I got to hear HAARP for once. Oh, and the sky didn't fall
down. Scientists 1, crack-pots 0.



All times are GMT +1. The time now is 08:03 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com