G'day Guys,

I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo

I have two recordings:

1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:

http://www.mediafire.com/?2v11ey4l1xd

2. is just an mp3 recording of similar period.

http://www.mediafire.com/?byt1jtm91uz


--
------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website: http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

On Jan 20, 6:56 am, AussieDrifter
wrote:
G'day Guys,

I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo

I have two recordings:

1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:

http://www.mediafire.com/?2v11ey4l1xd

2. is just an mp3 recording of similar period.

http://www.mediafire.com/?byt1jtm91uz

--
------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:



G'day Guys,

I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo

I have two recordings:

1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:

http://www.mediafire.com/?2v11ey4l1xd

2. is just an mp3 recording of similar period.

http://www.mediafire.com/?byt1jtm91uz

--
------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw

On Jan 20, 2:42 am, Rfburns wrote:
On Jan 20, 2:25 am, wrote:



On Jan 20, 6:56 am, AussieDrifter
wrote:

G'day Guys,

I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo

I have two recordings:

1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:

http://www.mediafire.com/?2v11ey4l1xd

2. is just an mp3 recording of similar period.

http://www.mediafire.com/?byt1jtm91uz

--
------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw

I'm using a JRC NRD-535D receiver and a Heathkit active audio filter.
The up signal is about S-4 and the reflected is about S-2 with the
usual up and down fading.
jw

Rfburns,

if possible could you post a sample of what you're hearing

Cheers
Mark

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website: http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening



Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:



G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw


--

Guys,

The 7407.5 khz freq was had slightly louder tones, but still no
detectable echo There was a couple of jokers also that played CW a
few times

Like before two Recordings:

1. Video of Atomic Clock and Audio

http://www.mediafire.com/?6mydbvxwzzm

2. Audio Only Mp3

http://www.mediafire.com/?0sekv1dd0ts

3 & 4: Screen Shots of Waterfall using Spectrum Lab. This is an
awesome tool, makes see the signal much better

Capt01 - http://www.mediafire.com/imageview.p...1xtkhi&thumb=4
Capt02 - http://www.mediafire.com/imageview.p...0emgpl&thumb=4

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website: http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening


Regards
Mark

AussieDrifter wrote:
G'day Guys,

I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo

I have two recordings:

1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:

http://www.mediafire.com/?2v11ey4l1xd

2. is just an mp3 recording of similar period.

http://www.mediafire.com/?byt1jtm91uz




--

On Jan 20, 2:56 am, AussieDrifter
wrote:
Rfburns,

if possible could you post a sample of what you're hearing

Cheers
Mark

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening



Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:

G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw

--

I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.

The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.

jw

On Jan 20, 3:07 am, Rfburns wrote:
On Jan 20, 2:56 am, AussieDrifter
wrote:



Rfburns,

if possible could you post a sample of what you're hearing

Cheers
Mark

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:

G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw

--

I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.

The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.

jw

The 7 MHz signal is louder than the previous 6 MHz signal hear in West
Virginia. I also hear some goof balls transmitting CW near the
frequency

jw

On Jan 20, 3:11 am, Rfburns wrote:
On Jan 20, 3:07 am, Rfburns wrote:



On Jan 20, 2:56 am, AussieDrifter
wrote:

Rfburns,

if possible could you post a sample of what you're hearing

Cheers
Mark

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:

G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw

--

I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.

The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.

jw

The 7 MHz signal is louder than the previous 6 MHz signal hear in West
Virginia. I also hear some goof balls transmitting CW near the
frequency

jw

At times the reflected signal is almost as loud as the up
transmission.

jw

On Jan 20, 3:14 am, Rfburns wrote:
On Jan 20, 3:11 am, Rfburns wrote:



On Jan 20, 3:07 am, Rfburns wrote:

On Jan 20, 2:56 am, AussieDrifter
wrote:

Rfburns,

if possible could you post a sample of what you're hearing

Cheers
Mark

------------------------------------------------------------------

Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/

Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening

Rfburns wrote:
On Jan 20, 2:25 am, wrote:
On Jan 20, 6:56 am, AussieDrifter
wrote:

G'day Guys,
I can hear the tones, but based on the timing sequences, what I'm
actually hearing is the Transmission Tone faintly, so there is no change
of me hearing the echo
I have two recordings:
1. The first is a screen video capture of the Atom Clock Software and
the radios audio for audio to show the timings:
http://www.mediafire.com/?2v11ey4l1xd
2. is just an mp3 recording of similar period.
http://www.mediafire.com/?byt1jtm91uz
--
------------------------------------------------------------------
Location: Canberra Australia
Radio: Icom R75 with DSP options
Antenna: Cliff Dweller 2
Website:http://aussiedrifter.blogspot.com/
Listen Live via USTREAM.TV:
http://www.ustream.tv/channel/aussie...wave-listening
I am getting nothing an any of my antennas.

Bummer.

I will listen for the next feed.

Terry
Terry

I can hear it right now on 7.4075 here in West Virginia - both the up
transmission and the reflected signal.
jw

--

I wish I could but I'm not set up for recording. I'm actually
listening on 7.40690 which is an offset of 600Hz with the active audio
filter in peak mode.

The reflected bounce signal seems to have a little bit of dopler shift
on it and sounds slightly higher in frequency than the two second up
transmission.

jw

The 7 MHz signal is louder than the previous 6 MHz signal hear in West
Virginia. I also hear some goof balls transmitting CW near the
frequency

jw

At times the reflected signal is almost as loud as the up
transmission.

jw

At 3:15 AM EST the signal is getting louder. Pretty cool stuff.

jw